(* How to change the notation for \<lbrakk> \<rbrakk> meta-level implications? *)

(*<*)

theory Paper

imports "Quotient"

        "LaTeXsugar"

        "../Nominal/FSet"

begin

notation (latex output)

  rel_conj ("_ \<circ>\<circ>\<circ> _" [53, 53] 52) and

  pred_comp ("_ \<circ>\<circ> _") and

  "op -->" (infix "\<longrightarrow>" 100) and

  "==>" (infix "\<Longrightarrow>" 100) and

  fun_map ("_ \<^raw:\mbox{\singlearr}> _" 51) and

  fun_rel ("_ \<^raw:\mbox{\doublearr}> _" 51) and

  list_eq (infix "\<approx>" 50) and (* Not sure if we want this notation...? *)

  fempty ("\<emptyset>") and

  funion ("_ \<union> _") and

  finsert ("{_} \<union> _") and 

  Cons ("_::_") and

  concat ("flat") and

  fconcat ("\<Union>")

ML {*

fun nth_conj n (_, r) = nth (HOLogic.dest_conj r) n;

fun style_lhs_rhs proj = Scan.succeed (fn ctxt => fn t =>

  let

    val concl =

      Object_Logic.drop_judgment (ProofContext.theory_of ctxt) (Logic.strip_imp_concl t)

  in

    case concl of (_ $ l $ r) => proj (l, r)

    | _ => error ("Binary operator expected in term: " ^ Syntax.string_of_term ctxt concl)

  end);

*}

setup {*

  Term_Style.setup "rhs1" (style_lhs_rhs (nth_conj 0)) #>

  Term_Style.setup "rhs2" (style_lhs_rhs (nth_conj 1)) #>

  Term_Style.setup "rhs3" (style_lhs_rhs (nth_conj 2))

*}

(*>*)

section {* Introduction *}

text {* 

   \begin{flushright}

  {\em ``Not using a [quotient] package has its advantages: we do not have to\\ 

    collect all the theorems we shall ever want into one giant list;''}\\

    Larry Paulson \cite{Paulson06}

  \end{flushright}

  \noindent

  Isabelle is a popular generic theorem prover in which many logics can be

  implemented. The most widely used one, however, is Higher-Order Logic

  (HOL). This logic consists of a small number of axioms and inference rules

  over a simply-typed term-language. Safe reasoning in HOL is ensured by two

  very restricted mechanisms for extending the logic: one is the definition of

  new constants in terms of existing ones; the other is the introduction of

  new types by identifying non-empty subsets in existing types. It is well

  understood how to use both mechanisms for dealing with quotient

  constructions in HOL (see \cite{Homeier05,Paulson06}).  For example the

  integers in Isabelle/HOL are constructed by a quotient construction over the

  type @{typ "nat \<times> nat"} and the equivalence relation

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "(n\<^isub>1, n\<^isub>2) \<approx> (m\<^isub>1, m\<^isub>2) \<equiv> n\<^isub>1 + m\<^isub>2 = m\<^isub>1 + n\<^isub>2"}\hfill\numbered{natpairequiv}

  \end{isabelle}

  \noindent

  This constructions yields the new type @{typ int} and definitions for @{text

  "0"} and @{text "1"} of type @{typ int} can be given in terms of pairs of

  natural numbers (namely @{text "(0, 0)"} and @{text "(1, 0)"}). Operations

  such as @{text "add"} with type @{typ "int \<Rightarrow> int \<Rightarrow> int"} can be defined in

  terms of operations on pairs of natural numbers (namely @{text

  "add_pair (n\<^isub>1, m\<^isub>1) (n\<^isub>2,

  m\<^isub>2) \<equiv> (n\<^isub>1 + n\<^isub>2, m\<^isub>1 + m\<^isub>2)"}).

  Similarly one can construct the type of finite sets, written @{term "\<alpha> fset"}, 

  by quotienting the type @{text "\<alpha> list"} according to the equivalence relation

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "xs \<approx> ys \<equiv> (\<forall>x. memb x xs \<longleftrightarrow> memb x ys)"}\hfill\numbered{listequiv}

  \end{isabelle}

  \noindent

  which states that two lists are equivalent if every element in one list is

  also member in the other. The empty finite set, written @{term "{||}"}, can

  then be defined as the empty list and the union of two finite sets, written

  @{text "\<union>"}, as list append.

  Quotients are important in a variety of areas, but they are ubiquitous in

  the area of reasoning about programming language calculi. A simple example

  is the lambda-calculus, whose raw terms are defined as

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "t ::= x | t t | \<lambda>x.t"}\hfill\numbered{lambda}

  \end{isabelle}

  \noindent

  The problem with this definition arises, for instance, when one attempts to

  prove formally the substitution lemma \cite{Barendregt81} by induction

  over the structure of terms. This can be fiendishly complicated (see

  \cite[Pages 94--104]{CurryFeys58} for some ``rough'' sketches of a proof

  about raw lambda-terms). In contrast, if we reason about

  $\alpha$-equated lambda-terms, that means terms quotient according to

  $\alpha$-equivalence, then the reasoning infrastructure provided, 

  for example, by Nominal Isabelle \cite{UrbanKaliszyk11} makes the formal 

  proof of the substitution lemma almost trivial. 

  The difficulty is that in order to be able to reason about integers, finite

  sets or $\alpha$-equated lambda-terms one needs to establish a reasoning

  infrastructure by transferring, or \emph{lifting}, definitions and theorems

  from the raw type @{typ "nat \<times> nat"} to the quotient type @{typ int}

  (similarly for finite sets and $\alpha$-equated lambda-terms). This lifting

  usually requires a \emph{lot} of tedious reasoning effort \cite{Paulson06}.  

  It is feasible to do this work manually, if one has only a few quotient

  constructions at hand. But if they have to be done over and over again, as in 

  Nominal Isabelle, then manual reasoning is not an option.

  The purpose of a \emph{quotient package} is to ease the lifting of theorems

  and automate the reasoning as much as possible. In the

  context of HOL, there have been a few quotient packages already

  \cite{harrison-thesis,Slotosch97}. The most notable one is by Homeier

  \cite{Homeier05} implemented in HOL4.  The fundamental construction these

  quotient packages perform can be illustrated by the following picture:

  \begin{center}

  \mbox{}\hspace{20mm}\begin{tikzpicture}

  %%\draw[step=2mm] (-4,-1) grid (4,1);

  \draw[very thick] (0.7,0.3) circle (4.85mm);

  \draw[rounded corners=1mm, very thick] ( 0.0,-0.9) rectangle ( 1.8, 0.9);

  \draw[rounded corners=1mm, very thick] (-1.95,0.8) rectangle (-2.9,-0.195);

  \draw (-2.0, 0.8) --  (0.7,0.8);

  \draw (-2.0,-0.195)  -- (0.7,-0.195);

  \draw ( 0.7, 0.23) node {\begin{tabular}{@ {}c@ {}}equiv-\\[-1mm]clas.\end{tabular}};

  \draw (-2.45, 0.35) node {\begin{tabular}{@ {}c@ {}}new\\[-1mm]type\end{tabular}};

  \draw (1.8, 0.35) node[right=-0.1mm]

    {\begin{tabular}{@ {}l@ {}}existing\\[-1mm] type\\ (sets of raw elements)\end{tabular}};

  \draw (0.9, -0.55) node {\begin{tabular}{@ {}l@ {}}non-empty\\[-1mm]subset\end{tabular}};

  \draw[->, very thick] (-1.8, 0.36) -- (-0.1,0.36);

  \draw[<-, very thick] (-1.8, 0.16) -- (-0.1,0.16);

  \draw (-0.95, 0.26) node[above=0.4mm] {@{text Rep}};

  \draw (-0.95, 0.26) node[below=0.4mm] {@{text Abs}};

  \end{tikzpicture}

  \end{center}

  \noindent

  The starting point is an existing type, to which we refer as the

  \emph{raw type}, over which an equivalence relation given by the user is

  defined. With this input the package introduces a new type, to which we

  refer as the \emph{quotient type}. This type comes with an

  \emph{abstraction} and a \emph{representation} function, written @{text Abs}

  and @{text Rep}.\footnote{Actually slightly more basic functions are given;

  the functions @{text Abs} and @{text Rep} need to be derived from them. We

  will show the details later. } These functions relate elements in the

  existing type to elements in the new type and vice versa; they can be uniquely

  identified by their quotient type. For example for the integer quotient construction

  the types of @{text Abs} and @{text Rep} are

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "Abs :: nat \<times> nat \<Rightarrow> int"}\hspace{10mm}@{text "Rep :: int \<Rightarrow> nat \<times> nat"}

  \end{isabelle}

  \noindent

  We therefore often write @{text Abs_int} and @{text Rep_int} if the

  typing information is important. 

  Every abstraction and representation function stands for an isomorphism

  between the non-empty subset and elements in the new type. They are

  necessary for making definitions involving the new type. For example @{text

  "0"} and @{text "1"} of type @{typ int} can be defined as

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "0 \<equiv> Abs_int (0, 0)"}\hspace{10mm}@{text "1 \<equiv> Abs_int (1, 0)"}

  \end{isabelle}

  \noindent

  Slightly more complicated is the definition of @{text "add"} having type 

  @{typ "int \<Rightarrow> int \<Rightarrow> int"}. Its definition is as follows

   \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "add n m \<equiv> Abs_int (add_pair (Rep_int n) (Rep_int m))"}

  \hfill\numbered{adddef}

  \end{isabelle}

  \noindent

  where we take the representation of the arguments @{text n} and @{text m},

  add them according to the function @{text "add_pair"} and then take the

  abstraction of the result.  This is all straightforward and the existing

  quotient packages can deal with such definitions. But what is surprising

  that none of them can deal with slightly more complicated definitions involving

  \emph{compositions} of quotients. Such compositions are needed for example

  in case of quotienting lists to yield finite sets and the operator that 

  flattens lists of lists, defined as follows

  @{thm [display, indent=10] concat.simps(1) concat.simps(2)[no_vars]}

  \noindent

  We expect that the corresponding operator on finite sets, written @{term "fconcat"},

  builds finite unions of finite sets:

  @{thm [display, indent=10] fconcat_empty[no_vars] fconcat_insert[no_vars]}

  \noindent

  The quotient package should automatically provide us with a definition for @{text "\<Union>"} in

  terms of @{text flat}, @{text Rep_fset} and @{text Abs_fset}. The problem is 

  that the method  used in the existing quotient

  packages of just taking the representation of the arguments and then taking

  the abstraction of the result is \emph{not} enough. The reason is that in case

  of @{text "\<Union>"} we obtain the incorrect definition

  @{text [display, indent=10] "\<Union> S \<equiv> Abs_fset (flat (Rep_fset S))"}

  \noindent

  where the right-hand side is not even typable! This problem can be remedied in the

  existing quotient packages by introducing an intermediate step and reasoning

  about flattening of lists of finite sets. However, this remedy is rather

  cumbersome and inelegant in light of our work, which can deal with such

  definitions directly. The solution is that we need to build aggregate

  representation and abstraction functions, which in case of @{text "\<Union>"}

  generate the following definition

  @{text [display, indent=10] "\<Union> S \<equiv> Abs_fset (flat ((map Rep_fset \<circ> Rep_fset) S))"}

  \noindent

  where @{term map} is the usual mapping function for lists. In this paper we

  will present a formal definition of our aggregate abstraction and

  representation functions (this definition was omitted in \cite{Homeier05}). 

  They generate definitions, like the one above for @{text "\<Union>"}, 

  according to the type of the raw constant and the type

  of the quotient constant. This means we also have to extend the notions

  of \emph{aggregate equivalence relation}, \emph{respectfulness} and \emph{preservation}

  from Homeier \cite{Homeier05}.

  In addition we are able to address the criticism by Paulson \cite{Paulson06} cited

  at the beginning of this section about having to collect theorems that are

  lifted from the raw level to the quotient level into one giant list. Our

  quotient package is the first one that is modular so that it allows to lift

  single theorems separately. This has the advantage for the user of being able to develop a

  formal theory interactively as a natural progression. A pleasing side-result of

  the modularity is that we are able to clearly specify what is involved

  in the lifting process (this was only hinted at in \cite{Homeier05} and

  implemented as a ``rough recipe'' in ML-code).

  The paper is organised as follows: Section \ref{sec:prelims} presents briefly

  some necessary preliminaries; Section \ref{sec:type} describes the definitions 

  of quotient types and shows how definitions of constants can be made over 

  quotient types. Section \ref{sec:resp} introduces the notions of respectfullness

  and preservation; Section \ref{sec:lift} describes the lifting of theorems, 

  and Section \ref{sec:conc} concludes and compares our results to existing 

  work.

*}

section {* Preliminaries and General Quotients\label{sec:prelims} *}

text {*

  We describe here briefly the most basic notions of HOL we rely on, and 

  the important definitions given by Homeier for quotients \cite{Homeier05}.

  At its core HOL is based on a simply-typed term language, where types are 

  recorded in Church-style fashion (that means, we can infer the type of 

  a term and its subterms without any additional information). The grammars

  for types and terms are as follows

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  \begin{tabular}{@ {}rl@ {\hspace{3mm}}l@ {}}

  @{text "\<sigma>, \<tau> ::="} & @{text "\<alpha> | (\<sigma>,\<dots>, \<sigma>) \<kappa>"} & (type variables and type constructors)\\

  @{text "t, s ::="} & @{text "x\<^isup>\<sigma> | c\<^isup>\<sigma> | t t | \<lambda>x\<^isup>\<sigma>. t"} & 

  (variables, constants, applications and abstractions)\\

  \end{tabular}

  \end{isabelle}

  \noindent

  We often write just @{text \<kappa>} for @{text "() \<kappa>"}, and use @{text "\<alpha>s"} and

  @{text "\<sigma>s"} to stand for collections of type variables and types,

  respectively.  The type of a term is often made explicit by writing @{text

  "t :: \<sigma>"}. HOL contains a type @{typ bool} for booleans and the function 

  type, written @{text "\<sigma> \<Rightarrow> \<tau>"}. HOL also contains

  many primitive and defined constants; for example equality @{text "= :: \<sigma> \<Rightarrow>

  \<sigma> \<Rightarrow> bool"} and the identity function @{text "id :: \<sigma> => \<sigma>"} (the former

  being primitive and the latter being defined as @{text

  "\<lambda>x\<^sup>\<sigma>. x\<^sup>\<sigma>"}).

  An important point to note is that theorems in HOL can be seen as a subset

  of terms that are constructed specially (namely through axioms and prove

  rules). As a result we are able later on to define automatic proof

  procedures showing that one theorem implies another by decomposing the term

  underlying the first theorem.

  Like Homeier, our work relies on map-functions defined for every type constructor,

  like @{text map} for lists. Homeier describes others for products, sums,

  options and also the following map for function types

  @{thm [display, indent=10] fun_map_def[no_vars, THEN eq_reflection]}

  \noindent

  Using this map-function, we can give the following, equivalent, but more 

  uniform, definition for @{text add} shown in \eqref{adddef}:

  @{text [display, indent=10] "add \<equiv> (Rep_int \<singlearr> Rep_int \<singlearr> Abs_int) add_pair"}

  \noindent

  We will sometimes refer to a map-function defined for a type-constructor @{text \<kappa>}

  as @{text "map_\<kappa>"}. 

  It will also be necessary to have operators, referred to as @{text "rel_\<kappa>"},

  which define equivalence relations in terms of constituent equivalence

  relations. For example given two equivalence relations @{text "R\<^isub>1"}

  and @{text "R\<^isub>2"}, we can define an equivalence relations over 

  products as follows

  %

  @{text [display, indent=10] "(R\<^isub>1 \<tripple> R\<^isub>2) (x\<^isub>1, x\<^isub>2) (y\<^isub>1, y\<^isub>2) \<equiv> R\<^isub>1 x\<^isub>1 y\<^isub>1 \<and> R\<^isub>2 x\<^isub>2 y\<^isub>2"}

  \noindent

  Similarly, Homeier defines the following operator for defining equivalence 

  relations over function types:

  %

  @{thm [display, indent=10] fun_rel_def[of "R\<^isub>1" "R\<^isub>2", no_vars, THEN eq_reflection]}

  The central definition in Homeier's work \cite{Homeier05} relates equivalence 

  relations, abstraction and representation functions:

  \begin{definition}[Quotient Types]

  Given a relation $R$, an abstraction function $Abs$

  and a representation function $Rep$, the predicate @{term "Quotient R Abs Rep"}

  means

  \begin{enumerate}

  \item @{thm (rhs1) Quotient_def[of "R", no_vars]}

  \item @{thm (rhs2) Quotient_def[of "R", no_vars]}

  \item @{thm (rhs3) Quotient_def[of "R", no_vars]}

  \end{enumerate}

  \end{definition}

  \noindent

  The value of this definition is that validity of @{text Quotient} can be 

  proved in terms of the validity of @{text "Quotient"} over the constituent types. 

  For example Homeier proves the following property for higher-order quotient

  types:

  \begin{proposition}[Function Quotient]\label{funquot}

  @{thm[mode=IfThen] fun_quotient[where ?R1.0="R\<^isub>1" and ?R2.0="R\<^isub>2" 

      and ?abs1.0="Abs\<^isub>1" and ?abs2.0="Abs\<^isub>2" and ?rep1.0="Rep\<^isub>1" and ?rep2.0="Rep\<^isub>2"]}

  \end{proposition}

  \noindent

  We will heavily rely on this part of Homeier's work including an extension 

  to deal with compositions of equivalence relations defined as follows

  \begin{definition}[Composition of Relations]

  @{abbrev "rel_conj R\<^isub>1 R\<^isub>2"} where @{text "\<circ>\<circ>"} is the predicate

  composition defined by the rule

  %

  @{thm [mode=Rule, display, indent=10] pred_compI[of "R\<^isub>1" "x" "y" "R\<^isub>2" "z"]}

  \end{definition}

  \noindent

  Unfortunately a quotient type theorem, like Proposition \ref{funquot}, for

  the composition of any two quotients in not true (it is not even typable in

  the HOL type system). However, we can prove useful instances for compatible

  containers. We will show such example in Section \ref{sec:resp}.

*}

section {* Quotient Types and Quotient Definitions\label{sec:type} *}

text {*

  The first step in a quotient construction is to take a name for the new

  type, say @{text "\<kappa>\<^isub>q"}, and an equivalence relation, say @{text R},

  defined over a raw type, say @{text "\<sigma>"}. The type of the equivalence

  relation must be of type @{text "\<sigma> \<Rightarrow> \<sigma> \<Rightarrow> bool"}. The user-visible part of

  the declaration is therefore

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  \isacommand{quotient\_type}~~@{text "\<alpha>s \<kappa>\<^isub>q = \<sigma> / R"}

  \end{isabelle}

  \noindent

  and a proof that @{text "R"} is indeed an equivalence relation. Two concrete

  examples are

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  \begin{tabular}{@ {}l}

  \isacommand{quotient\_type}~~@{text "int = nat \<times> nat / \<approx>\<^bsub>nat \<times> nat\<^esub>"}\\

  \isacommand{quotient\_type}~~@{text "\<alpha> fset = \<alpha> list / \<approx>\<^bsub>list\<^esub>"}

  \end{tabular}

  \end{isabelle}

  \noindent

  which introduce the type of integers and of finite sets using the

  equivalence relations @{text "\<approx>\<^bsub>nat \<times> nat\<^esub>"} and @{text

  "\<approx>\<^bsub>list\<^esub>"} defined earlier in \eqref{natpairequiv} and

  \eqref{listequiv}, respectively (the proofs about being equivalence

  relations is omitted).  Given this data, we declare internally 

  the quotient types as

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  \isacommand{typedef}~~@{text "\<alpha>s \<kappa>\<^isub>q = {c. \<exists>x. c = R x}"}

  \end{isabelle}

  \noindent

  where the right-hand side is the (non-empty) set of equivalence classes of

  @{text "R"}. The restriction in this declaration is that the type variables

  in the raw type @{text "\<sigma>"} must be included in the type variables @{text

  "\<alpha>s"} declared for @{text "\<kappa>\<^isub>q"}. HOL will provide us with the following

  abstraction and representation functions having the type

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "abs_\<kappa>\<^isub>q :: \<sigma> set \<Rightarrow> \<alpha>s \<kappa>\<^isub>q"}\hspace{10mm}@{text "rep_\<kappa>\<^isub>q :: \<alpha>s \<kappa>\<^isub>q \<Rightarrow> \<sigma> set"}

  \end{isabelle}

  \noindent 

  They relate the new quotient type and equivalence classes of the raw

  type. However, as Homeier \cite{Homeier05} noted, it is much more convenient

  to work with the following derived abstraction and representation functions

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  @{text "Abs_\<kappa>\<^isub>q x \<equiv> abs_\<kappa>\<^isub>q (R x)"}\hspace{10mm}@{text "Rep_\<kappa>\<^isub>q x \<equiv> \<epsilon> (rep_\<kappa>\<^isub>q x)"}

  \end{isabelle}

  \noindent

  on the expense of having to use Hilbert's choice operator @{text "\<epsilon>"} in the

  definition of @{text "Rep_\<kappa>\<^isub>q"}. These derived notions relate the

  quotient type and the raw type directly, as can be seen from their type,

  namely @{text "\<sigma> \<Rightarrow> \<alpha>s \<kappa>\<^isub>q"} and @{text "\<alpha>s \<kappa>\<^isub>q \<Rightarrow> \<sigma>"},

  respectively.  Given that @{text "R"} is an equivalence relation, the

  following property

  \begin{proposition}

  @{text "Quotient R Abs_\<kappa>\<^isub>q Rep_\<kappa>\<^isub>q"}

  \end{proposition}

  \noindent

  holds  for every quotient type defined

  as above (for the proof see \cite{Homeier05}).

  The next step in a quotient construction is to introduce definitions of new constants

  involving the quotient type. These definitions need to be given in terms of concepts

  of the raw type (remember this is the only way how to extend HOL

  with new definitions). For the user visible is the declaration

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  \isacommand{quotient\_definition}~~@{text "c :: \<tau>"}~~\isacommand{is}~~@{text "t :: \<sigma>"}

  \end{isabelle}

  \noindent

  where @{text t} is the definiens (its type @{text \<sigma>} can always be inferred)

  and @{text "c"} is the name of definiendum, whose type @{text "\<tau>"} needs to be

  given explicitly (the point is that @{text "\<tau>"} and @{text "\<sigma>"} can only differ 

  in places where a quotient and raw type are involved). Two concrete examples are

  \begin{isabelle}\ \ \ \ \ \ \ \ \ \ %%%

  \begin{tabular}{@ {}l}

  \isacommand{quotient\_definition}~~@{text "0 :: int"}~~\isacommand{is}~~@{text "(0::nat, 0::nat)"}\\

  \isacommand{quotient\_definition}~~@{text "\<Union> :: (\<alpha> fset) fset \<Rightarrow> \<alpha> fset"}~~%

  \isacommand{is}~~@{text "flat"} 

  \end{tabular}

  \end{isabelle}

  \noindent

  The first one declares zero for integers and the second the operator for

  building unions of finite sets. 

  The problem for us is that from such declarations we need to derive proper

  definitions using the @{text "Abs"} and @{text "Rep"} functions for the

  quotient types involved. The data we rely on is the given quotient type