theory Antiquotes

imports "../Appendix"

begin

section \<open>Useful Document Antiquotations\label{rec:docantiquotations}\<close>

text \<open>

  {\bf Problem:} 

  How to keep your ML-code inside a document synchronised with the actual code?\smallskip

  {\bf Solution:} This can be achieved with document antiquotations.\smallskip

  Document antiquotations can be used for ensuring consistent type-setting of

  various entities in a document. They can also be used for sophisticated

  \LaTeX-hacking. If you type on the Isabelle level

\<close>

print_antiquotations

text \<open>

  you obtain a list of all currently available document antiquotations and

  their options.  

  Below we will give the code for two additional document

  antiquotations both of which are intended to typeset ML-code. The crucial point

  of these document antiquotations is that they not just print the ML-code, but also 

  check whether it compiles. This will provide a sanity check for the code

  and also allows you to keep documents in sync with other code, for example

  Isabelle.

  We first describe the antiquotation \<open>ML_checked\<close> with the syntax:

  The code is checked by sending the ML-expression @{text [quotes] "val _ =

  document antiquotation is as follows:

\<close>

ML \<open>Input.pos_of\<close>

ML%linenosgray\<open>fun ml_enclose bg en source =

  ML_Lex.read bg @ ML_Lex.read_source false source @ ML_Lex.read en;\<close>

ML%linenosgray\<open>fun ml_val code_txt = (ml_enclose "val _ = " "" code_txt)

fun output_ml ctxt code_txt =

let

  val _ = ML_Context.eval_in (SOME ctxt) ML_Compiler.flags (Input.pos_of code_txt) (ml_val code_txt)

in 

   Pretty.str (Input.source_content code_txt)

end

val ml_checked_setup = Thy_Output.antiquotation_pretty_source @{binding "ML_checked"} (Scan.lift Args.text_input) output_ml\<close>

setup \<open>ml_checked_setup\<close>

text \<open>

  case the code, and then calls the function @{ML output_ml}. As mentioned

  before, the parsed code is sent to the ML-compiler in Line 4 using the

  function @{ML ml_val}, which constructs the appropriate ML-expression, and

  Document_Antiquotation} in the next line pretty prints the code. This function expects

  that the code is a list of (pretty)strings where each string correspond to a

  for txt} which produces such a list according to linebreaks.  There are a

  number of options for antiquotations that are observed by the function 

  Line 7 sets up the new document antiquotation.

  \begin{readmore}

  For more information about options of document antiquotations see \rsccite{sec:antiq}).

  \end{readmore}

  information about the line number, in case an error is detected. We 

  can improve the code above slightly by writing 

\<close>

(* FIXME: remove

ML%linenosgray{*fun output_ml ctxt (code_txt, pos) =

let

  val srcpos = {delimited = false, pos = pos, text = ml_val code_txt}

in

  (ML_Context.eval_source_in (SOME ctxt) ML_Compiler.flags srcpos;

   code_txt 

   |> space_explode "\n"

   |> map Pretty.str

   |> Pretty.list "" ""

   |> Document_Antiquotation.output ctxt

   |> Latex.string)

end

val ml_checked_setup2 = Thy_Output.antiquotation @{binding "ML_checked2"}

         (Scan.lift (Parse.position Args.name)) output_ml *}

setup {* ml_checked_setup2 *}

*)

text \<open>

  where in Lines 1 and 2 the positional information is properly treated. The

  parser @{ML Parse.position} encodes the positional information in the 

  result.

  We can now write \<open>@{ML_checked2 "2 + 3"}\<close> in a document in order to

  obtain @{ML_checked "2 + 3"} and be sure that this code compiles until

  somebody changes the definition of addition.

  The second document antiquotation we describe extends the first by a pattern

  that specifies what the result of the ML-code should be and checks the

  consistency of the actual result with the given pattern. For this we are

  going to implement the document antiquotation:

  To add some convenience and also to deal with large outputs, the user can

  give a partial specification by using ellipses. For example \<open>(\<dots>, \<dots>)\<close>

  for specifying a pair.  In order to check consistency between the pattern

  and the output of the code, we have to change the ML-expression that is sent 

  to the compiler: in \<open>ML_checked2\<close> we sent the expression @{text [quotes]

  "val _ = a_piece_of_code"} to the compiler; now the wildcard \<open>_\<close>

  must be be replaced by the given pattern. However, we have to remove all

  ellipses from it and replace them by @{text [quotes] "_"}. The following 

  function will do this:

\<close>

ML%linenosgray\<open>fun ml_pat pat code =

  ML_Lex.read "val" @ ML_Lex.read_source false pat @ ML_Lex.read " = " @ ML_Lex.read_source false code\<close>

(*

ML %grayML{*fun ml_pat code_txt pat =

let val pat' = 

         implode (map (fn "\<dots>" => "_" | s => s) (Symbol.explode pat))

in 

  ml_enclose ("val " ^ pat' ^ " = ") "" code_txt 

end*}

*)

text \<open>

  Next we add a response indicator to the result using:

\<close>

ML %grayML\<open>fun add_resp pat = map (fn s => "> " ^ s) pat\<close>

text \<open>

  The rest of the code of \<open>ML_resp\<close> is: 

\<close>

ML %linenosgray\<open>

fun output_ml_resp ctxt (code_txt, pat) =

let

  val _ = ML_Context.eval_in (SOME ctxt) ML_Compiler.flags (Input.pos_of code_txt) (ml_pat pat code_txt)

  val code = space_explode "\n" (Input.source_content code_txt)

  val resp = add_resp (space_explode "\n" (Input.source_content pat))

in 

   Pretty.str (cat_lines (code @ resp))

end

val ml_response_setup = Thy_Output.antiquotation_pretty_source @{binding "ML_resp"} (Scan.lift (Args.text_input -- Args.text_input)) output_ml_resp

\<close>

(*

ML %linenosgray{*fun output_ml_resp {context = ctxt, ...} ((code_txt, pat), pos) = 

  (let

     val srcpos = {delimited = false, text = ml_pat (code_txt, pat), pos = pos}

   in

     ML_Context.eval_source_in (SOME ctxt) ML_Compiler.flags srcpos 

   end;

   let 

     val code_output = space_explode "\n" code_txt 

     val resp_output = add_resp (space_explode "\n" pat)

   in 

     Thy_Output.output ctxt (map Pretty.str (code_output @ resp_output)) 

   end)

val ml_resp_setup = Thy_Output.antiquotation @{binding "ML_resp"} 

          (Scan.lift (Parse.position (Args.text_input -- Args.text_input))) 

             output_ml_resp*}

*)

setup \<open>ml_response_setup\<close>

(* FIXME *)

text \<open>

  In comparison with \<open>ML_checked\<close>, we only changed the line about 

  the compiler (Line~2), the lines about

  the output (Lines 4 to 7) and the parser in the setup (Line 11). Now 

  you can write

  to obtain

  @{ML_resp [display] "true andalso false" "false"} 

  or 

  to obtain

  @{ML_resp [display] "let val i = 3 in (i * i, \"foo\") end" "(9, _)"} 

  In both cases, the check by the compiler ensures that code and result

  match. A limitation of this document antiquotation, however, is that the

  pattern can only be given for values that can be constructed. This excludes

  values that are abstract datatypes, like @{ML_type thm}s and @{ML_type cterm}s.

\<close>

end