theory Parsing

imports Base

begin

chapter {* Parsing *}

text {*

  Isabelle distinguishes between \emph{outer} and \emph{inner} syntax. 

  Theory commands, such as \isacommand{definition}, \isacommand{inductive} and so

  on, belong to the outer syntax, whereas items inside double quotation marks, such 

  as terms, types and so on, belong to the inner syntax. For parsing inner syntax, 

  Isabelle uses a rather general and sophisticated algorithm due to Earley, which 

  is driven by priority grammars. Parsers for outer syntax are built up by functional

  parsing combinators. These combinators are a well-established technique for parsing, 

  which has, for example, been described in Paulson's classic ML-book \cite{paulson-ml2}.

  Isabelle developers are usually concerned with writing these outer syntax parsers, 

  either for new definitional packages or for calling tactics with specific arguments. 

  \begin{readmore}

  The library 

  for writing parser combinators can be split up, roughly, into two parts. 

  The first part consists of a collection of generic parser combinators defined

  in the structure @{ML_struct Scan} in the file 

  @{ML_file "Pure/General/scan.ML"}. The second part of the library consists of 

  combinators for dealing with specific token types, which are defined in the 

  structure @{ML_struct OuterParse} in the file 

  @{ML_file "Pure/Isar/outer_parse.ML"}.

  \end{readmore}

*}

text {*

  Let us first have a look at parsing strings using generic parsing combinators. 

  The function @{ML "(op $$)"} takes a string and will ``consume'' this string from 

  a given input list of strings. ``Consume'' in this context means that it will 

  return a pair consisting of this string and the rest of the input list. 

  For example:

  @{ML_response [display] "($$ \"h\") (explode \"hello\")" "(\"h\", [\"e\", \"l\", \"l\", \"o\"])"}

  @{ML_response [display] "($$ \"w\") (explode \"world\")" "(\"w\", [\"o\", \"r\", \"l\", \"d\"])"}

  This function will either succeed (as in the two examples above) or raise the exeption 

  @{ML_text "FAIL"} if no string can be consumed. For example trying to parse

  @{ML_response_fake [display] "($$ \"x\") (explode \"world\")" 

                               "Exception FAIL raised"}

  will raise the exception @{ML_text "FAIL"}.

  There are three exceptions used in the parsing combinators:

  \begin{itemize}

  \item @{ML_text "FAIL"} is used to indicate that alternative routes of parsing 

  might be explored. 

  \item @{ML_text "MORE"} indicates that there is not enough input for the parser. For example 

  in @{ML_text "($$ \"h\") []"}.

  \item @{ML_text "ABORT"} is the exception which is raised when a dead end is reached. 

  It is used for example in the function @{ML "(op !!)"} (see below).

  \end{itemize}

@{ML_response [display] 

"let 

  val hw = Scan.one (fn x => x = \"h\" orelse x = \"w\")

  val input1 = (explode \"hello\")

  val input2 = (explode \"world\")

in

    (hw input1, hw input2)

end"

    "((\"h\", [\"e\", \"l\", \"l\", \"o\"]),(\"w\", [\"o\", \"r\", \"l\", \"d\"]))"}

  Two parser can be connected in sequence by using the funtion @{ML "(op --)"}. 

  For example parsing @{ML_text "h"}, @{ML_text "e"} and @{ML_text "l"} in this 

  sequence can be achieved by

  @{ML_response [display] "(($$ \"h\") -- ($$ \"e\") -- ($$ \"l\")) (explode \"hello\")"

                          "(((\"h\", \"e\"), \"l\"), [\"l\", \"o\"])"}

  Note how the result of consumed strings builds up on the left as nested pairs.  

  Parsers that explore 

  alternatives can be constructed using the function @{ML "(op ||)"}. For example, the 

  parser @{ML_open "(p || q)" for p q} returns the result of @{ML_text "p"}, in case it succeeds, 

  otherwise it returns the result of @{ML_text "q"}. For example

@{ML_response [display] 

"let 

  val hw = ($$ \"h\") || ($$ \"w\")

  val input1 = (explode \"hello\")

  val input2 = (explode \"world\")

in

  (hw input1, hw input2)

end"

  "((\"h\", [\"e\", \"l\", \"l\", \"o\"]), (\"w\", [\"o\", \"r\", \"l\", \"d\"]))"}

  The functions @{ML "(op |--)"} and @{ML "(op --|)"} work like the sequencing funtion 

  for parsers, except that they discard the item parsed by the first (respectively second)

  parser. For example

@{ML_response [display]

"let 

  val just_e = ($$ \"h\") |-- ($$ \"e\") 

  val just_h = ($$ \"h\") --| ($$ \"e\") 

  val input = (explode \"hello\")  

in 

  (just_e input, just_h input)

end"

  "((\"e\", [\"l\", \"l\", \"o\"]),(\"h\", [\"l\", \"l\", \"o\"]))"}

  The parser @{ML_open "Scan.optional p x" for p x} returns the result of the parser 

  @{ML_text "p"}, if it succeeds; otherwise it returns 

  the default value @{ML_text "x"}. For example

@{ML_response [display]

"let 

  val p = Scan.optional ($$ \"h\") \"x\"

  val input1 = (explode \"hello\")

  val input2 = (explode \"world\")  

in 

  (p input1, p input2)

end" 

 "((\"h\", [\"e\", \"l\", \"l\", \"o\"]), (\"x\", [\"w\", \"o\", \"r\", \"l\", \"d\"]))"}

  The function @{ML "(op !!)"} helps to produce appropriate error messages

  during parsing. For example if one wants to parse that @{ML_text p} is immediately 

  followed by @{ML_text q}, or start a completely different parser @{ML_text r},

  one might write

  @{ML_open [display] "(p -- q) || r" for p q r}

  However, this parser is problematic for producing an appropriate error message, in case

  the parsing of @{ML_open "(p -- q)" for p q} fails. Because in that case one loses with the parser

  above the information 

  that @{ML_text p} should be followed by @{ML_text q}. To see this consider the case in

  which @{ML_text p} 

  is present in the input, but not @{ML_text q}. That means @{ML_open "(p -- q)" for p q} will fail 

  and the 

  alternative parser @{ML_text r} will be tried. However in many circumstanes this will be the wrong

  parser for the input ``p-followed-by-q'' and therefore will also fail. The error message is then 

  caused by the

  failure of @{ML_text r}, not by the absense of @{ML_text q} in the input. This kind of situation

  can be avoided by using the funtion @{ML "(op !!)"}. This function aborts the whole process of

  parsing in case of failure and invokes an error message. For example if we invoke the parser

  @{ML [display] "(!! (fn _ => \"foo\") ($$ \"h\"))"}

  on @{ML_text [quotes] "hello"}, the parsing succeeds

  @{ML_response [display] 

                "(!! (fn _ => \"foo\") ($$ \"h\")) (explode \"hello\")" 

                "(\"h\", [\"e\", \"l\", \"l\", \"o\"])"}

  but if we invoke it on @{ML_text [quotes] "world"}

  @{ML_response_fake [display] "(!! (fn _ => \"foo\") ($$ \"h\")) (explode \"world\")"

                               "Exception ABORT raised"}

  the parsing aborts and the error message @{ML_text "foo"} is printed out. In order to

  see the error message properly, we need to prefix the parser with the function 

  @{ML "Scan.error"}. For example

  @{ML_response_fake [display] "Scan.error ((!! (fn _ => \"foo\") ($$ \"h\")))"

                               "Exception Error \"foo\" raised"}

  This ``prefixing'' is usually done by wrappers such as @{ML "OuterSyntax.command"} 

  (FIXME: give reference to later place). 

  Returning to our example of parsing @{ML_open "(p -- q) || r" for p q r}. If we want

  to generate the correct error message for p-followed-by-q, then

  we have to write, for example

*}

ML {* 

fun p_followed_by_q p q r =

  let 

     val err = (fn _ => p ^ " is not followed by " ^ q)

  in

    (($$ p) -- (!! err ($$ q))) || (($$ r) -- ($$ r))

  end

*}

text {*

  Running this parser with

  @{ML_response_fake [display] "Scan.error (p_followed_by_q \"h\" \"e\" \"w\") (explode \"holle\")"

                               "Exception ERROR \"h is not followed by e\" raised"} 

  gives the correct error message. Running it with

  @{ML_response [display] "Scan.error (p_followed_by_q \"h\" \"e\" \"w\") (explode \"wworld\")"

                          "((\"w\", \"w\"), [\"o\", \"r\", \"l\", \"d\"])"}

  yields the expected parsing. 

  The function @{ML_open "Scan.repeat p" for p} will apply a parser @{ML_text p} as 

  often as it succeeds. For example

  @{ML_response [display] "Scan.repeat ($$ \"h\") (explode \"hhhhello\")" 

                "([\"h\", \"h\", \"h\", \"h\"], [\"e\", \"l\", \"l\", \"o\"])"}

  Note that @{ML "Scan.repeat"} stores the parsed items in a list. The function

  @{ML "Scan.repeat1"} is similar, but requires that the parser @{ML_text "p"} 

  succeeds at least once.

  After parsing succeeded, one nearly always wants to apply a function on the parsed 

  items. This is done using the function @{ML_open "(p >> f)" for p f} which runs 

  first the parser @{ML_text p} and upon successful completion applies the 

  function @{ML_text f} to the result. For example

@{ML_response [display]

"let 

  fun double (x,y) = (x^x,y^y) 

in

  (($$ \"h\") -- ($$ \"e\") >> double) (explode \"hello\")

end"

"((\"hh\", \"ee\"), [\"l\", \"l\", \"o\"])"}

  doubles the two parsed input strings.

  The function @{ML Scan.lift} takes a parser and a pair as arguments. This function applies

  the given parser to the second component of the pair and leaves the  first component 

  untouched. For example

@{ML_response [display]

"Scan.lift (($$ \"h\") -- ($$ \"e\")) (1,(explode \"hello\"))"

"((\"h\", \"e\"), (1, [\"l\", \"l\", \"o\"]))"}

  (FIXME: In which situations is this useful? Give examples.) 

*}

section {* Parsing Theory Syntax *}

text {*

  Most of the time, however, Isabelle developers have to deal with parsing tokens, not strings.

  This is because the parsers for the theory syntax, as well as the parsers for the 

  argument syntax of proof methods and attributes use the type 

  @{ML_type OuterLex.token} (which is identical to the type @{ML_type OuterParse.token}).

  \begin{readmore}

  The parser functions for the theory syntax are contained in the structure

  @{ML_struct OuterParse} defined in the file @{ML_file  "Pure/Isar/outer_parse.ML"}.

  The definition for tokens is in the file @{ML_file "Pure/Isar/outer_lex.ML"}.

  \end{readmore}

  The structure @{ML_struct OuterLex} defines several kinds of token (for example 

  @{ML "OuterLex.Ident"} for identifiers, @{ML "OuterLex.Keyword"} for keywords and

  @{ML "OuterLex.Command"} for commands). Some parsers take into account the 

  kind of token.

  We can generate a token list using the function @{ML "OuterSyntax.scan"}, which we give

  below @{ML "Position.none"} as argument since, at the moment, we are not interested in

  generating precise error messages. The following\footnote{There is something funny 

  going on with the pretty printing of the result token list.}

  produces three tokens where the first and the last are identifiers, since 

  @{ML_text [quotes] "hello"} and @{ML_text [quotes] "world"} do not match 

  any other category. The second indicates a space. Many parsing functions 

  later on will require spaces, comments and the like to have been filtered out.

  If we parse

  we obtain a list consiting of only command and keyword tokens.

  If you want to see which keywords and commands are currently known, use

  the following (you might have to adjust the @{ML print_depth} in order to

  see the complete list):

@{ML_response_fake [display] 

"let 

  val (keywords, commands) = OuterKeyword.get_lexicons ()

in 

  (Scan.dest_lexicon commands, Scan.dest_lexicon keywords)

end" 

"([\"}\",\"{\",\<dots>],[\"\<rightleftharpoons>\",\"\<leftharpoondown>\",\<dots>])"}

  Now the parser @{ML "OuterParse.$$$"} parses a single keyword. For example

@{ML_response [display]

"let 

  val input1 = OuterSyntax.scan Position.none \"where for\"

  val input2 = OuterSyntax.scan Position.none \"|in\"

in 

  (OuterParse.$$$ \"where\" input1, OuterParse.$$$ \"|\" input2)

end"

"((\"where\",\<dots>),(\"|\",\<dots>))"}

  Like before, we can sequentially connect parsers with @{ML "(op --)"}. For example 

@{ML_response [display]

"let 

  val input = OuterSyntax.scan Position.none \"|in\"

in 

  (OuterParse.$$$ \"|\" -- OuterParse.$$$ \"in\") input

end"

"((\"|\",\"in\"),[])"}

  The parser @{ML_open "OuterParse.enum s p" for s p} parses a possibly empty 

  list of items recognised by the parser @{ML_text p}, where the items are 

@{ML_response [display]

"let 

  val input = OuterSyntax.scan Position.none \"in|in|in\\n\"

in 

  (OuterParse.enum \"|\" (OuterParse.$$$ \"in\")) input

end" 

"([\"in\",\"in\",\"in\"],[\<dots>])"}

  Note that we had to add a @{ML_text [quotes] "\\n"} at the end of the parsed

  string, otherwise the parser would have consumed all tokens and then failed with

*}

section {* Parsing Inner Syntax *}

ML {*

let 

  val input = OuterSyntax.scan Position.none "0"

in 

  OuterParse.prop input

end 

*}

text {* (FIXME funny output for a proposition) *}

chapter {* Parsing *}

text {*

  Lots of Standard ML code is given in this document, for various reasons,

  including:

  \begin{itemize}

  \item direct quotation of code found in the Isabelle source files,

  or simplified versions of such code

  \item identifiers found in the Isabelle source code, with their types 

  (or specialisations of their types)

  \item code examples, which can be run by the reader, to help illustrate the

  behaviour of functions found in the Isabelle source code

  \item ancillary functions, not from the Isabelle source code, 

  which enable the reader to run relevant code examples

  \item type abbreviations, which help explain the uses of certain functions

  \end{itemize}

*}

section {* Parsing Isar input *}

text {*

  The typical parsing function has the type

  \texttt{'src -> 'res * 'src}, with input  

  of type \texttt{'src}, returning a result 

  of type \texttt{'res}, which is (or is derived from) the first part of the

  input, and also returning the remainder of the input.

  (In the common case, when it is clear what the ``remainder of the input''

  means, we will just say that the functions ``returns'' the

  value of type \texttt{'res}). 

  An exception is raised if an appropriate value 

  cannot be produced from the input.

  A range of exceptions can be used to identify different reasons 

  for the failure of a parse.

  This contrasts the standard parsing function in Standard ML,

  which is of type 

  \texttt{type ('res, 'src) reader = 'src -> ('res * 'src) option};

  (for example, \texttt{List.getItem} and \texttt{Substring.getc}).

  However, much of the discussion at 

  FIX file:/home/jeremy/html/ml/SMLBasis/string-cvt.html

  is relevant.

  Naturally one may convert between the two different sorts of parsing functions

  as follows:

  \begin{verbatim}

  open StringCvt ;

  type ('res, 'src) ex_reader = 'src -> 'res * 'src

  (* ex_reader : ('res, 'src) reader -> ('res, 'src) ex_reader *)

  fun ex_reader rdr src = Option.valOf (rdr src) ;

  (* reader : ('res, 'src) ex_reader -> ('res, 'src) reader *)

  fun reader exrdr src = SOME (exrdr src) handle _ => NONE ;

  \end{verbatim}

*}

section{* The \texttt{Scan} structure *}

text {* 

  The source file is \texttt{src/General/scan.ML}.

  This structure provides functions for using and combining parsing functions

  of the type \texttt{'src -> 'res * 'src}.

  Three exceptions are used:

  \begin{verbatim}

  exception MORE of string option;  (*need more input (prompt)*)

  exception FAIL of string option;  (*try alternatives (reason of failure)*)

  exception ABORT of string;        (*dead end*)

  \end{verbatim}

  Many functions in this structure (generally those with names composed of

  symbols) are declared as infix.

  Some functions from that structure are

  \begin{verbatim}