% ACMCONF DOCUMENT STYLE - Updated 17 August 1995.

%

% This is a patched version of the 5 April 1993 release.  No stylistic changes

% have been made; it should produce output identical to the 1993 release if

% that release worked properly on your system.  A LaTeX2e patch has been added

% for systems having problems with the section header font.  There is also a

% macro for producing an ACM copyright notice and a box with reprint info.

%

% If you get an error message similar to

%

% ! Undefined control sequence.

% l.165 \font\ninsfb = cmssbx10\@ptscale

%

% then see the comments beginning on line 173 (look for "DIAGNOSTICS").

%-----------------------------------------------------------------------

%	Modification of Traub/Shivers version by Kevin Theobald, McGill

%	University.  New version has automatic copyright space, option

%	for box around "to appear" entry, and style option to indent

%	first paragraph after subheadings.  Released 5 April 1993.

%

%	To use: install in reachable directory (one contained in TEXINPUTS

%	environment variable); use \documentstyle[<options>]{acmconf}

%-----------------------------------------------------------------------

%    adapted from ARTICLE document style by Ken Traub

%    Hacked for [preprint] option by Olin Shivers 4/91

% ARTICLE DOCUMENT STYLE -- Released 16 March 1988

%    for LaTeX version 2.09

% Copyright (C) 1988 by Leslie Lamport

%%% ACMCONF is a document style for producing two-column camera-ready pages for

%%% ACM conferences, according to ACM specifications.  The main features of

%%% this style are:

%%%

%%% 1)  Two columns.

%%% 2)  Side and top margins of 4.5pc, bottom margin of 6pc, column gutter of

%%%     2pc, hence columns are 20pc wide and 55.5pc tall.  (6pc = 1in, approx)

%%% 3)  First page has title information, and an extra 6pc of space at the

%%%     bottom of the first column for the ACM copyright notice.

%%% 4)  Text is 9pt on 10pt baselines; titles (except main) are 9pt bold.

%%%

%%% This document style supports a [preprint] style option that allows

%%% you to run off a copy for a preprint -- with page numbers, "to

%%% appear" information, and so forth. This is documented below.

%%%

%%% This document style also supports a [secindent] style option which

%%% causes paragraphs following (sub)section heads to be indented like

%%% the others.	 (Added by KBT)

%%%

%%% Finally, the macro \acmcopy{y} (y is year, e.g., 1995) prints the text of

%%% an ACM copyright notice.  This is useful for making a copy of the paper on

%%% the author's FTP site (ACM requires a copyright notice).  (Added by KBT)

%%%

%%% There are a few restrictions you must observe:

%%%

%%% 1)  You cannot change the font size; ACM wants you to use 9pt.

%%% 3)  You must start your paper with the \maketitle command.  Prior to the

%%%     \maketitle you must have \title and \author commands.  If you have a

%%%     \date command it will be ignored; no date appears on the paper, since

%%%     the proceedings will have a date on the front cover.

%%% 4)  Marginal paragraphs, tables of contents, lists of figures and tables,

%%%     and page headings are all forbidden.

%%% 5)  The `figure' environment will produce a figure one column wide; if you

%%%     want one that is two columns wide, use `figure*'.

%%%

%%% Page Headings:

%%% Normally, \pagestyle commands are ignored --- pages have no headings or

%%% numbers. ACM will number the pages for you when they are inserted into the

%%% proceedings (you should put page numbers on the BACK of each page, in

%%% light pencil, in case someone drops your paper on the floor).

%%%

%%% If the [preprint] option is present, then \pagestyle commands are obeyed,

%%% and the default is \pagestyle{plain}.  All pages (including the first)

%%% are numbered.  (This is useful if you want to make a reprint version

%%% of your paper, with page numbering identical to the conference

%%% proceedings.  In such a case, you may need to insert the command

%%% \setcounter{page}{...} before \maketitle.) The [twoside] option is

%%% also useful when using headers.

%%%

%%% Copyright Space:

%%% This style automatically leaves 1" blank space at the bottom of page 1/

%%% column 1.  This space can optionally be filled with some text using the

%%% \toappear{...} command.  If used, this command must be BEFORE the \maketitle

%%% command.  If this command is defined AND [preprint] is on, then the

%%% space is filled with the {...} text (at the bottom); otherwise, it is

%%% blank.  If you use \toappearbox{...} instead of \toappear{...} then a

%%% box will be drawn around the text (if [preprint] is on).

%%%

%%% A typical usage looks like this:

%%%     \toappear{To appear in the Ninth AES Conference on Medievil Lithuanian

%%%               Embalming Technique, June 1991, Alfaretta, Georgia.}

%%% This will be included in the preprint, and left out of the conference

%%% version.

%%%

%%% Acmconf defines two useful conditionals.

%%% - \ifacmconf{true-stuff}{false-stuff}

%%%   expands to true-stuff.

%%% - \ifpreprint true-stuff \else else-stuff \fi

%%%   expands to true-stuff if the [preprint] option is being used,

%%%   otherwise it expands to else-stuff.

%%% \ifacmconf is a latex command; \ifpreprint is a real latex conditional.

%%%

%%% WARNING:

%%% Some dvi-ps converters heuristically allow chars to drift from their

%%% true positions a few pixels. This loses noticeably with the 9pt sans-serif

%%% bold font used for section headers. You turn this hackery off in our

%%% dvi-ps converters with the -e option:

%%%     dvips -e 0 foo.dvi >foo.ps

\typeout{Document Style `acmconf' <22 May 89>. Hacked 4/91 by}

\typeout{ shivers@cs.cmu.edu, 4/93 by theobald@cs.mcgill.ca}

\typeout{Bugs to theobald@cs.mcgill.ca}

\def\acmcopy#1{Copyright \copyright {#1} by the Association for Computing

Machinery, Inc. Permission to make digital or hard copies of part or all of

this work for personal or classroom use is granted without fee provided that

copies are not made or distributed for profit or direct commercial advantage

and that copies bear this notice and the full citation on the first page.

Copyrights for components of this work owned by others than ACM must be

honored. Abstracting with credit is permitted. To copy otherwise, to

republish, to post on servers, or to redistribute to lists, requires prior

specific permission and/or a fee. Request permissions from Publications

Dept., ACM Inc., fax +1 (212) 869-0481, or (permissions@acm.org).}

\newif\if@acmconf\@acmconftrue

\long\def\ifacmconf#1#2{\if@acmconf#1\else#2\fi}

\newif\ifpreprint

\def\ds@preprint{\preprinttrue}

\def\ds@twoside{\@twosidetrue \@mparswitchtrue}

\def\ds@secindent{\def\@afterindentfalse{\@afterindenttrue}}

%

% The following macro added 8/17/95 by KBT.  Use to make box above title with

% name of proceedings and/or copyright notice.  This box is created only if

% [preprint] is on.  Use: \coverbox{vert. pos.}{horiz. pos.}{box width}{text}

% Creates box with officially zero dimension, so does not affect layout.

%

\def\coverbox#1#2#3#4{\ifpreprint{\makebox[0pt][l]{\raisebox{#1}[0pt][0pt]{\hspace*{#2}\fbox{\parbox{#3}{#4}}}}}\else{}\fi}

\@namedef{ds@10pt}{\@latexerr{The `10pt' option is not allowed in the `acmconf'

  document style.}\@eha}

\@namedef{ds@11pt}{\@latexerr{The `11pt' option is not allowed in the `acmconf'

  document style.}\@eha}

\@namedef{ds@12pt}{\@latexerr{The `12pt' option is not allowed in the `acmconf'

  document style.}\@eha}

\@options

\lineskip 1pt		% \lineskip is 1pt for all font sizes.

\normallineskip 1pt

\def\baselinestretch{1}

\def\@normalsize{\@setsize\normalsize{10pt}\ixpt\@ixpt

\abovedisplayskip 9pt plus2pt minus4.5pt%

\belowdisplayskip \abovedisplayskip

\abovedisplayshortskip  \z@ plus3pt%

\belowdisplayshortskip  5.4pt plus3pt minus3pt%

\let\@listi\@listI}	% Setting of \@listi added 9 Jun 87

\def\small{\@setsize\small{9pt}\viiipt\@viiipt

\abovedisplayskip 7.6pt plus 3pt minus 4pt%

\belowdisplayskip \abovedisplayskip

\abovedisplayshortskip \z@ plus2pt%

\belowdisplayshortskip 3.6pt plus2pt minus 2pt

\def\@listi{\leftmargin\leftmargini %% Added 22 Dec 87

\topsep 4pt plus 2pt minus 2pt\parsep 2pt plus 1pt minus 1pt

\itemsep \parsep}}

\def\footnotesize{\@setsize\footnotesize{8pt}\viipt\@viipt

\abovedisplayskip 6.4pt plus 2pt minus 4pt%

\belowdisplayskip \abovedisplayskip

\abovedisplayshortskip \z@ plus 1pt%

\belowdisplayshortskip 2.7pt plus 1pt minus 2pt

\def\@listi{\leftmargin\leftmargini %% Added 22 Dec 87

\topsep 3pt plus 1pt minus 1pt\parsep 2pt plus 1pt minus 1pt

\itemsep \parsep}}

\def\scriptsize{\@setsize\scriptsize{8pt}\viipt\@viipt}

\def\tiny{\@setsize\tiny{6pt}\vpt\@vpt}

\def\large{\@setsize\large{13.6pt}\xipt\@xipt}

\def\Large{\@setsize\Large{16pt}\xiipt\@xiipt}

\def\LARGE{\@setsize\LARGE{18pt}\xivpt\@xivpt}

\def\huge{\@setsize\huge{22pt}\xviipt\@xviipt}

\def\Huge{\@setsize\Huge{25pt}\xxpt\@xxpt}

%%% Patch for LaTeX-2e (LaTeX 2.09 compatibility mode)

%%% The line \font\ninsfb = cmssbx10\@ptscale9 is replaced by

\expandafter\ifx\csname fontseries\endcsname\relax

  \font\ninsfb = cmssbx10\@ptscale9

 \else

  \def\ninsfb{\fontfamily{cmss}\fontseries{bx}\fontshape{n}

  \fontsize{9}{\f@baselineskip}\selectfont}

\fi

%%% End patch for LaTeX-2e

\def\@acmtitlestyle{\normalsize\ninsfb}

%%%

%%% DIAGNOSTICS:

%%% The ten lines above (the patch and the \def\@acmtitlestyle command) will

%%% cause problems if your printer doesn't have the 9pt. bold sans-serif font.

%%% If this is a problem, try commenting out those lines and uncommenting one

%%% of the following alternatives.  (It is best to try them in order until

%%% finding one that works; the earlier alternatives cause less change.)

%%%

%%% ALTERNATIVE 1: (works if your system has the same font in 10pt.)

%%% \font\tensfb = cmssbx10

%%% \def\@acmtitlestyle{\normalsize\tensfb}

%%% ALTERNATIVE 2:

%%% \def\@acmtitlestyle{\normalsize\ninbf}

%%% ALTERNATIVE 3:

%%% \def\@acmtitlestyle{\normalsize\tenbf}

\normalsize  % Choose the normalsize font.

\oddsidemargin 4.5pc

\evensidemargin 4.5pc

\advance\oddsidemargin by -1in	% Correct for LaTeX gratuitousness

\advance\evensidemargin by -1in % Correct for LaTeX gratuitousness

\marginparwidth 0pt		% Margin pars are not allowed.

\marginparsep 11pt		% Horizontal space between outer margin and

				% marginal note

				% Top of page:

\topmargin 4.5pc		% Nominal distance from top of page to top of

				% box containing running head.

\advance\topmargin by -1in	% Correct for LaTeX gratuitousness

\headheight 0pt			% Height of box containing running head.

\headsep 0pt			% Space between running head and text.

				% Bottom of page:

\footskip 30pt			% Distance from baseline of box containing foot

				% to baseline of last line of text.

\footheight 12pt		% Height of box containing running foot.

%% Must redefine the top margin so there's room for headers and

%% page numbers if you are using the preprint option. Footers

%% are OK as is. Olin.

\advance\topmargin by -37pt	% Leave 37pt above text for headers

\headheight 12pt		% Height of box containing running head.

\headsep 25pt			% Space between running head and text.

\textheight 666pt	% 9 1/4 column height

\textwidth 42pc		% Width of text line.

			% For two-column mode:

\columnsep 2pc		%    Space between columns

\columnseprule 0pt	%    Width of rule between columns.

\hfuzz 1pt		% Allow some variation in column width, otherwise it's

			% too hard to typeset in narrow columns.

\footnotesep 5.6pt 	% Height of strut placed at the beginning of every

			% footnote = height of normal \footnotesize strut,

			% so no extra space between footnotes.

\skip\footins 8.1pt plus 4pt minus 2pt	% Space between last line of text and

    					% top of first footnote.

\floatsep 11pt plus 2pt minus 2pt	% Space between adjacent floats moved

					% to top or bottom of text page.

\textfloatsep 18pt plus 2pt minus 4pt	% Space between main text and floats

					% at top or bottom of page.

\intextsep 11pt plus 2pt minus 2pt	% Space between in-text figures and

					% text.

\@maxsep 18pt				% The maximum of \floatsep,

					% \textfloatsep and \intextsep (minus

					% the stretch and shrink).

\dblfloatsep 11pt plus 2pt minus 2pt	% Same as \floatsep for double-column

					% figures in two-column mode.

\dbltextfloatsep 18pt plus 2pt minus 4pt% \textfloatsep for double-column

					% floats.

\@dblmaxsep 18pt			% The maximum of \dblfloatsep and

					% \dbltexfloatsep.

\@fptop 0pt plus 1fil	 % Stretch at top of float page/column. (Must be

			 % 0pt plus ...)

\@fpsep 8pt plus 2fil	 % Space between floats on float page/column.

\@fpbot 0pt plus 1fil	 % Stretch at bottom of float page/column. (Must be

			 % 0pt plus ... )

\@dblfptop 0pt plus 1fil % Stretch at top of float page. (Must be 0pt plus ...)

\@dblfpsep 8pt plus 2fil % Space between floats on float page.

\@dblfpbot 0pt plus 1fil % Stretch at bottom of float page. (Must be

			 % 0pt plus ... )

\marginparpush 5pt	 % Minimum vertical separation between two marginal

			 % notes.

\parskip 0pt plus 1pt		 % Extra vertical space between paragraphs.

\parindent 13.5pt		 % Width of paragraph indentation.

%\topsep 8pt plus 2pt minus 4pt	 % Extra vertical space, in addition to

				 % \parskip, added above and below list and

				 % paragraphing environments.

\partopsep 2pt plus 1pt minus 1pt% Extra vertical space, in addition to

				 % \parskip and \topsep, added when user

				 % leaves blank line before environment.

%\itemsep 4pt plus 2pt minus 1pt % Extra vertical space, in addition to

				 % \parskip, added between list items.

% See \@listI for values of \topsep and \itemsep

\@lowpenalty   51	% Produced by \nopagebreak[1] or \nolinebreak[1]

\@medpenalty  151	% Produced by \nopagebreak[2] or \nolinebreak[2]

\@highpenalty 301	% Produced by \nopagebreak[3] or \nolinebreak[3]

\@beginparpenalty -\@lowpenalty	% Before a list or paragraph environment.

\@endparpenalty   -\@lowpenalty	% After a list or paragraph environment.

\@itempenalty     -\@lowpenalty	% Between list items.

% \clubpenalty		% 'Club line'  at bottom of page.

% \widowpenalty		% 'Widow line' at top of page.

% \displaywidowpenalty	% Math display widow line.

% \predisplaypenalty	% Breaking before a math display.

% \postdisplaypenalty	% Breaking after a math display.

% \interlinepenalty	% Breaking at a line within a paragraph.

% \brokenpenalty	% Breaking after a hyphenated line.

\def\part{\par		% New paragraph

   \addvspace{4ex}	% Adds vertical space above title.

   \@afterindentfalse	% Suppresses indent in first paragraph.  Change

   \secdef\@part\@spart}% to \@afterindenttrue to have indent.

\def\@part[#1]#2{\ifnum \c@secnumdepth >\m@ne	% IF secnumdepth > -1

        \refstepcounter{part}			%  THEN step part counter

        \addcontentsline{toc}{part}{\thepart	%       add toc line

        \hspace{1em}#1}\else			%  ELSE add unnumbered line

      \addcontentsline{toc}{part}{#1}\fi	% FI

   { \parindent 0pt \raggedright

    \ifnum \c@secnumdepth >\m@ne% IF secnumdepth > -1

      \Large \bf Part \thepart	%   THEN Print 'Part' and

      \par \nobreak		%          number in \Large boldface.

    \fi				% FI

    \huge \bf			% Select \huge boldface.

    #2\markboth{}{}\par }	% Print title and set heading marks null.

    \nobreak			% TeX penalty to prevent page break.

    \vskip 3ex			% Space between title and text.

   \@afterheading		% Routine called after part and

    }				%     section heading.

\def\@spart#1{{\parindent 0pt \raggedright

    \huge \bf

    #1\par}			% Title.

    \nobreak			% TeX penalty to prevent page break.

    \vskip 3ex			% Space between title and text.

    \@afterheading		% Routine called after part and

  }				%     section heading.

\def\section{\@startsection {section}{1}{\z@}{-3.5ex plus -1ex minus

    -.2ex}{2.3ex plus .2ex}{\@acmtitlestyle}}

\def\subsection{\@startsection{subsection}{2}{\z@}{-3.25ex plus -1ex minus

   -.2ex}{1.5ex plus .2ex}{\@acmtitlestyle}}

\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-3.25ex plus

-1ex minus -.2ex}{1.5ex plus .2ex}{\@acmtitlestyle}}

\def\paragraph{\@startsection

     {paragraph}{4}{\z@}{3.25ex plus 1ex minus .2ex}{-1em}{\@acmtitlestyle}}

\def\subparagraph{\@startsection

     {subparagraph}{4}{\parindent}{3.25ex plus 1ex minus

     .2ex}{-1em}{\@acmtitlestyle}}

\setcounter{secnumdepth}{3}

\def\appendix{\par

  \setcounter{section}{0}

  \setcounter{subsection}{0}

  \def\thesection{\Alph{section}}}

\leftmargini 22.5pt

\leftmarginii 19.8pt	% > \labelsep + width of '(m)'

\leftmarginiii 16.8pt	% > \labelsep + width of 'vii.'

\leftmarginiv 15.3pt	% > \labelsep + width of 'M.'

\leftmarginv 9pt

\leftmarginvi 9pt

\leftmargin\leftmargini

\labelsep 4.5pt

\labelwidth\leftmargini\advance\labelwidth-\labelsep

% \parsep 4pt plus 2pt minus 1pt (Removed 9 Jun 87)

% \@listI defines top level and \@listi values of

% \leftmargin, \topsep, \parsep, and \itemsep

% (Added 9 Jun 87)

\def\@listI{\leftmargin\leftmargini \parsep 3.6pt plus 2pt minus 1pt%

\topsep 7.2pt plus 2pt minus 4pt%

\itemsep 3.6pt plus 2pt minus 1pt}

\let\@listi\@listI

\@listi

\def\@listii{\leftmargin\leftmarginii

   \labelwidth\leftmarginii\advance\labelwidth-\labelsep

   \topsep 3.6pt plus 2pt minus 1pt

   \parsep 1.8pt plus 0.9pt minus 0.9pt

   \itemsep \parsep}

\def\@listiii{\leftmargin\leftmarginiii

    \labelwidth\leftmarginiii\advance\labelwidth-\labelsep

    \topsep 1.8pt plus 0.9pt minus 0.9pt

    \parsep \z@ \partopsep 1pt plus 0pt minus 1pt

    \itemsep \topsep}

\def\@listiv{\leftmargin\leftmarginiv

     \labelwidth\leftmarginiv\advance\labelwidth-\labelsep}

\def\@listv{\leftmargin\leftmarginv

     \labelwidth\leftmarginv\advance\labelwidth-\labelsep}

\def\@listvi{\leftmargin\leftmarginvi

     \labelwidth\leftmarginvi\advance\labelwidth-\labelsep}

\def\labelenumi{\theenumi.}

\def\theenumi{\arabic{enumi}}

\def\labelenumii{(\theenumii)}

\def\theenumii{\alph{enumii}}

\def\p@enumii{\theenumi}

\def\labelenumiii{\theenumiii.}

\def\theenumiii{\roman{enumiii}}

\def\p@enumiii{\theenumi(\theenumii)}

\def\labelenumiv{\theenumiv.}

\def\theenumiv{\Alph{enumiv}}

\def\p@enumiv{\p@enumiii\theenumiii}

\def\labelitemi{$\bullet$}

\def\labelitemii{\bf --}

\def\labelitemiii{$\ast$}

\def\labelitemiv{$\cdot$}

\def\verse{\let\\=\@centercr

  \list{}{\itemsep\z@ \itemindent -1.5em\listparindent \itemindent

          \rightmargin\leftmargin\advance\leftmargin 1.5em}\item[]}

\let\endverse\endlist

\def\quotation{\list{}{\listparindent 1.5em

    \itemindent\listparindent

    \rightmargin\leftmargin \parsep 0pt plus 1pt}\item[]}

\let\endquotation=\endlist

\def\quote{\list{}{\rightmargin\leftmargin}\item[]}

\let\endquote=\endlist

\def\descriptionlabel#1{\hspace\labelsep \bf #1}

\def\description{\list{}{\labelwidth\z@ \itemindent-\leftmargin

       \let\makelabel\descriptionlabel}}

\let\enddescription\endlist

%\newdimen\descriptionmargin

%\descriptionmargin=3em

\def\theequation{\arabic{equation}}

% \jot = 3pt	% Extra space added between lines of an eqnarray environment

% The macro \@eqnnum defines how equation numbers are to appear in equations.

%

% \def\@eqnnum{(\theequation)}

%

% Changed pagenum to 1, so margins work right in twoside option.

% It's not clear to me that this environment is useful for acmconf.sty

% anyway. -Olin

\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn

     \else \newpage \fi \thispagestyle{empty}\c@page\@ne}

\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi \c@page\@ne}

\arraycolsep 4.5pt	% Half the space between columns in an array environment.

\tabcolsep 5.4pt	% Half the space between columns in a tabular environment.

\arrayrulewidth .4pt	% Width of rules in array and tabular environment.

\doublerulesep 1.8pt	% Space between adjacent rules in array or tabular env.

\tabbingsep \labelsep	% Space used by the \' command.  (See LaTeX manual.)

\skip\@mpfootins = \skip\footins

\fboxsep = 2.7pt	% Space left between box and text by \fbox and \framebox.

\fboxrule = .4pt	% Width of rules in box made by \fbox and \framebox.

\newcounter{part}

\newcounter {section}

\newcounter {subsection}[section]

\newcounter {subsubsection}[subsection]

\newcounter {paragraph}[subsubsection]

\newcounter {subparagraph}[paragraph]

\def\thepart{\Roman{part}} % Roman numeral part numbers.

\def\thesection       {\arabic{section}}

\def\thesubsection    {\thesection.\arabic{subsection}}

\def\thesubsubsection {\thesubsection .\arabic{subsubsection}}

\def\theparagraph     {\thesubsubsection.\arabic{paragraph}}

\def\thesubparagraph  {\theparagraph.\arabic{subparagraph}}

\def\@pnumwidth{1.55em}

\def\@tocrmarg {2.55em}

\def\@dotsep{4.5}

\setcounter{tocdepth}{3}

\def\tableofcontents{\@latexerr{\tableofcontents: Tables of contents are not

  allowed in the `acmconf' document style.}\@eha}

\def\l@part#1#2{\addpenalty{\@secpenalty}

   \addvspace{2.25em plus 1pt}  % space above part line

   \begingroup

   \@tempdima 3em	% width of box holding part number, used by

     \parindent \z@ \rightskip \@pnumwidth	%% \numberline

     \parfillskip -\@pnumwidth

     {\large \bf	% set line in \large boldface

     \leavevmode	% TeX command to enter horizontal mode.

     #1\hfil \hbox to\@pnumwidth{\hss #2}}\par

     \nobreak		% Never break after part entry

   \endgroup}

\def\l@section#1#2{\addpenalty{\@secpenalty} % good place for page break

   \addvspace{1.0em plus 1pt}	% space above toc entry

   \@tempdima 1.5em		% width of box holding section number

   \begingroup

     \parindent \z@ \rightskip \@pnumwidth

     \parfillskip -\@pnumwidth

     \bf			% Boldface.

     \leavevmode		% TeX command to enter horizontal mode.

      \advance\leftskip\@tempdima %% added 5 Feb 88 to conform to

      \hskip -\leftskip		  %% 25 Jan 88 change to \numberline

     #1\nobreak\hfil \nobreak\hbox to\@pnumwidth{\hss #2}\par

   \endgroup}

\def\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}}

\def\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}}

\def\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}}

\def\l@subparagraph{\@dottedtocline{5}{10em}{5em}}

\def\listoffigures{\@latexerr{\listoffigures: Lists of figures are not

  allowed in the `acmconf' document style.}\@eha}

\def\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}