theory General
imports Base FirstSteps
begin
(*<*)
setup{*
open_file_with_prelude
"General_Code.thy"
["theory General", "imports Base FirstSteps", "begin"]
*}
(*>*)
chapter {* Isabelle Essentials *}
text {*
Isabelle is build around a few central ideas. One central idea is the
LCF-approach to theorem proving where there is a small trusted core and
everything else is build on top of this trusted core
\cite{GordonMilnerWadsworth79}. The fundamental data
structures involved in this core are certified terms and certified types,
as well as theorems.
*}
section {* Terms and Types *}
text {*
In Isabelle, there are certified terms and uncertified terms (respectively types).
Uncertified terms are often just called terms. One way to construct them is by
using the antiquotation \mbox{@{text "@{term \<dots>}"}}. For example
@{ML_response [display,gray]
"@{term \"(a::nat) + b = c\"}"
"Const (\"op =\", \<dots>) $
(Const (\"HOL.plus_class.plus\", \<dots>) $ \<dots> $ \<dots>) $ \<dots>"}
constructs the term @{term "(a::nat) + b = c"}. The resulting term is printed using
the internal representation corresponding to the datatype @{ML_type_ind "term"},
which is defined as follows:
*}
ML_val %linenosgray{*datatype term =
Const of string * typ
| Free of string * typ
| Var of indexname * typ
| Bound of int
| Abs of string * typ * term
| $ of term * term *}
text {*
This datatype implements Church-style lambda-terms, where types are
explicitly recorded in variables, constants and abstractions. As can be
seen in Line 5, terms use the usual de Bruijn index mechanism for
representing bound variables. For example in
@{ML_response_fake [display, gray]
"@{term \"\<lambda>x y. x y\"}"
"Abs (\"x\", \"'a \<Rightarrow> 'b\", Abs (\"y\", \"'a\", Bound 1 $ Bound 0))"}
the indices refer to the number of Abstractions (@{ML Abs}) that we need to
skip until we hit the @{ML Abs} that binds the corresponding
variable. Constructing a term with dangling de Bruijn indices is possible,
but will be flagged as ill-formed when you try to typecheck or certify it
(see Section~\ref{sec:typechecking}). Note that the names of bound variables
are kept at abstractions for printing purposes, and so should be treated
only as ``comments''. Application in Isabelle is realised with the
term-constructor @{ML $}.
Isabelle makes a distinction between \emph{free} variables (term-constructor
@{ML Free} and written on the user level in blue colour) and
\emph{schematic} variables (term-constructor @{ML Var} and written with a
leading question mark). Consider the following two examples
@{ML_response_fake [display, gray]
"let
val v1 = Var ((\"x\", 3), @{typ bool})
val v2 = Var ((\"x1\", 3), @{typ bool})
val v3 = Free (\"x\", @{typ bool})
in
string_of_terms @{context} [v1, v2, v3]
|> tracing
end"
"?x3, ?x1.3, x"}
When constructing terms, you are usually concerned with free variables (as
mentioned earlier, you cannot construct schematic variables using the
antiquotation @{text "@{term \<dots>}"}). If you deal with theorems, you have to,
however, observe the distinction. The reason is that only schematic
variables can be instantiated with terms when a theorem is applied. A
similar distinction between free and schematic variables holds for types
(see below).
\begin{readmore}
Terms and types are described in detail in \isccite{sec:terms}. Their
definition and many useful operations are implemented in @{ML_file "Pure/term.ML"}.
For constructing terms involving HOL constants, many helper functions are defined
in @{ML_file "HOL/Tools/hologic.ML"}.
\end{readmore}
Constructing terms via antiquotations has the advantage that only typable
terms can be constructed. For example
@{ML_response_fake_both [display,gray]
"@{term \"x x\"}"
"Type unification failed: Occurs check!"}
raises a typing error, while it perfectly ok to construct the term
@{ML_response_fake [display,gray]
"let
val omega = Free (\"x\", @{typ \"nat \<Rightarrow> nat\"}) $ Free (\"x\", @{typ nat})
in
tracing (string_of_term @{context} omega)
end"
"x x"}
with the raw ML-constructors.
Sometimes the internal representation of terms can be surprisingly different
from what you see at the user-level, because the layers of
parsing/type-checking/pretty printing can be quite elaborate.
\begin{exercise}
Look at the internal term representation of the following terms, and
find out why they are represented like this:
\begin{itemize}
\item @{term "case x of 0 \<Rightarrow> 0 | Suc y \<Rightarrow> y"}
\item @{term "\<lambda>(x,y). P y x"}
\item @{term "{ [x::int] | x. x \<le> -2 }"}
\end{itemize}
Hint: The third term is already quite big, and the pretty printer
may omit parts of it by default. If you want to see all of it, you
can use the following ML-function to set the printing depth to a higher
value:
@{ML [display,gray] "print_depth 50"}
\end{exercise}
The antiquotation @{text "@{prop \<dots>}"} constructs terms by inserting the
usually invisible @{text "Trueprop"}-coercions whenever necessary.
Consider for example the pairs
@{ML_response [display,gray] "(@{term \"P x\"}, @{prop \"P x\"})"
"(Free (\"P\", \<dots>) $ Free (\"x\", \<dots>),
Const (\"Trueprop\", \<dots>) $ (Free (\"P\", \<dots>) $ Free (\"x\", \<dots>)))"}
where a coercion is inserted in the second component and
@{ML_response [display,gray] "(@{term \"P x \<Longrightarrow> Q x\"}, @{prop \"P x \<Longrightarrow> Q x\"})"
"(Const (\"==>\", \<dots>) $ \<dots> $ \<dots>,
Const (\"==>\", \<dots>) $ \<dots> $ \<dots>)"}
where it is not (since it is already constructed by a meta-implication).
The purpose of the @{text "Trueprop"}-coercion is to embed formulae of
an object logic, for example HOL, into the meta-logic of Isabelle. The coercion
is needed whenever a term is constructed that will be proved as a theorem.
As already seen above, types can be constructed using the antiquotation
@{text "@{typ \<dots>}"}. For example:
@{ML_response_fake [display,gray] "@{typ \"bool \<Rightarrow> nat\"}" "bool \<Rightarrow> nat"}
The corresponding datatype is
*}
ML_val{*datatype typ =
Type of string * typ list
| TFree of string * sort
| TVar of indexname * sort *}
text {*
Like with terms, there is the distinction between free type
variables (term-constructor @{ML "TFree"}) and schematic
type variables (term-constructor @{ML "TVar"}). A type constant,
like @{typ "int"} or @{typ bool}, are types with an empty list
of argument types. However, it is a bit difficult to show an
example, because Isabelle always pretty-prints types (unlike terms).
Here is a contrived example:
@{ML_response [display, gray]
"if Type (\"bool\", []) = @{typ \"bool\"} then true else false"
"true"}
\begin{readmore}
Types are described in detail in \isccite{sec:types}. Their
definition and many useful operations are implemented
in @{ML_file "Pure/type.ML"}.
\end{readmore}
*}
section {* Constructing Terms and Types Manually\label{sec:terms_types_manually} *}
text {*
While antiquotations are very convenient for constructing terms, they can
only construct fixed terms (remember they are ``linked'' at compile-time).
However, you often need to construct terms manually. For example, a
function that returns the implication @{text "\<And>(x::nat). P x \<Longrightarrow> Q x"} taking
@{term P} and @{term Q} as arguments can only be written as:
*}
ML{*fun make_imp P Q =
let
val x = Free ("x", @{typ nat})
in
Logic.all x (Logic.mk_implies (P $ x, Q $ x))
end *}
text {*
The reason is that you cannot pass the arguments @{term P} and @{term Q}
into an antiquotation.\footnote{At least not at the moment.} For example
the following does \emph{not} work.
*}
ML{*fun make_wrong_imp P Q = @{prop "\<And>(x::nat). P x \<Longrightarrow> Q x"} *}
text {*
To see this, apply @{text "@{term S}"} and @{text "@{term T}"}
to both functions. With @{ML make_imp} you obtain the intended term involving
the given arguments
@{ML_response [display,gray] "make_imp @{term S} @{term T}"
"Const \<dots> $
Abs (\"x\", Type (\"nat\",[]),
Const \<dots> $ (Free (\"S\",\<dots>) $ \<dots>) $ (Free (\"T\",\<dots>) $ \<dots>))"}
whereas with @{ML make_wrong_imp} you obtain a term involving the @{term "P"}
and @{text "Q"} from the antiquotation.
@{ML_response [display,gray] "make_wrong_imp @{term S} @{term T}"
"Const \<dots> $
Abs (\"x\", \<dots>,
Const \<dots> $ (Const \<dots> $ (Free (\"P\",\<dots>) $ \<dots>)) $
(Const \<dots> $ (Free (\"Q\",\<dots>) $ \<dots>)))"}
There are a number of handy functions that are frequently used for
constructing terms. One is the function @{ML_ind list_comb in Term}, which
takes as argument a term and a list of terms, and produces as output the
term list applied to the term. For example
@{ML_response_fake [display,gray]
"let
val trm = @{term \"P::nat\"}
val args = [@{term \"True\"}, @{term \"False\"}]
in
list_comb (trm, args)
end"
"Free (\"P\", \"nat\") $ Const (\"True\", \"bool\") $ Const (\"False\", \"bool\")"}
Another handy function is @{ML_ind lambda in Term}, which abstracts a variable
in a term. For example
@{ML_response_fake [display,gray]
"let
val x_nat = @{term \"x::nat\"}
val trm = @{term \"(P::nat \<Rightarrow> bool) x\"}
in
lambda x_nat trm
end"
"Abs (\"x\", \"nat\", Free (\"P\", \"bool \<Rightarrow> bool\") $ Bound 0)"}
In this example, @{ML lambda} produces a de Bruijn index (i.e.~@{ML "Bound 0"}),
and an abstraction, where it also records the type of the abstracted
variable and for printing purposes also its name. Note that because of the
typing annotation on @{text "P"}, the variable @{text "x"} in @{text "P x"}
is of the same type as the abstracted variable. If it is of different type,
as in
@{ML_response_fake [display,gray]
"let
val x_int = @{term \"x::int\"}
val trm = @{term \"(P::nat \<Rightarrow> bool) x\"}
in
lambda x_int trm
end"
"Abs (\"x\", \"int\", Free (\"P\", \"nat \<Rightarrow> bool\") $ Free (\"x\", \"nat\"))"}
then the variable @{text "Free (\"x\", \"int\")"} is \emph{not} abstracted.
This is a fundamental principle
of Church-style typing, where variables with the same name still differ, if they
have different type.
There is also the function @{ML_ind subst_free in Term} with which terms can be
replaced by other terms. For example below, we will replace in @{term
"(f::nat \<Rightarrow> nat \<Rightarrow> nat) 0 x"} the subterm @{term "(f::nat \<Rightarrow> nat \<Rightarrow> nat) 0"} by
@{term y}, and @{term x} by @{term True}.
@{ML_response_fake [display,gray]
"let
val sub1 = (@{term \"(f::nat \<Rightarrow> nat \<Rightarrow> nat) 0\"}, @{term \"y::nat \<Rightarrow> nat\"})
val sub2 = (@{term \"x::nat\"}, @{term \"True\"})
val trm = @{term \"((f::nat \<Rightarrow> nat \<Rightarrow> nat) 0) x\"}
in
subst_free [sub1, sub2] trm
end"
"Free (\"y\", \"nat \<Rightarrow> nat\") $ Const (\"True\", \"bool\")"}
As can be seen, @{ML subst_free} does not take typability into account.
However it takes alpha-equivalence into account:
@{ML_response_fake [display, gray]
"let
val sub = (@{term \"(\<lambda>y::nat. y)\"}, @{term \"x::nat\"})
val trm = @{term \"(\<lambda>x::nat. x)\"}
in
subst_free [sub] trm
end"
"Free (\"x\", \"nat\")"}
Similarly the function @{ML_ind subst_bounds in Term}, replaces lose bound
variables with terms. To see how this function works, let us implement a
function that strips off the outermost quantifiers in a term.
*}
ML{*fun strip_alls t =
let
fun aux (x, T, t) = strip_alls t |>> cons (Free (x, T))
in
case t of
Const ("All", _) $ Abs body => aux body
| _ => ([], t)
end*}
text {*
The function returns a pair consisting of the stripped off variables and
the body of the universal quantification. For example
@{ML_response_fake [display, gray]
"strip_alls @{term \"\<forall>x y. x = (y::bool)\"}"
"([Free (\"x\", \"bool\"), Free (\"y\", \"bool\")],
Const (\"op =\", \<dots>) $ Bound 1 $ Bound 0)"}
After calling @{ML strip_alls}, you obtain a term with lose bound variables. With
the function @{ML subst_bounds}, you can replace these lose @{ML_ind
Bound in Term}s with the stripped off variables.
@{ML_response_fake [display, gray, linenos]
"let
val (vrs, trm) = strip_alls @{term \"\<forall>x y. x = (y::bool)\"}
in
subst_bounds (rev vrs, trm)
|> string_of_term @{context}
|> tracing
end"
"x = y"}
Note that in Line 4 we had to reverse the list of variables that @{ML
strip_alls} returned. The reason is that the head of the list the function
@{ML subst_bounds} takes is the replacement for @{ML "Bound 0"}, the next
element for @{ML "Bound 1"} and so on.
Notice also that this function might introduce name clashes, since we
substitute just a variable with the name recorded in an abstraction. This
name is by no means unique. If clashes need to be avoided, then we should
use the function @{ML_ind dest_abs in Term}, which returns the body where
the lose de Bruijn index is replaced by a unique free variable. For example
@{ML_response_fake [display,gray]
"let
val body = Bound 0 $ Free (\"x\", @{typ nat})
in
Term.dest_abs (\"x\", @{typ \"nat \<Rightarrow> bool\"}, body)
end"
"(\"xa\", Free (\"xa\", \"nat \<Rightarrow> bool\") $ Free (\"x\", \"nat\"))"}
There are also many convenient functions that construct specific HOL-terms
in the structure @{ML_struct HOLogic}. For
example @{ML_ind mk_eq in HOLogic} constructs an equality out of two terms.
The types needed in this equality are calculated from the type of the
arguments. For example
@{ML_response_fake [gray,display]
"let
val eq = HOLogic.mk_eq (@{term \"True\"}, @{term \"False\"})
in
string_of_term @{context} eq
|> tracing
end"
"True = False"}
*}
text {*
\begin{readmore}
There are many functions in @{ML_file "Pure/term.ML"}, @{ML_file
"Pure/logic.ML"} and @{ML_file "HOL/Tools/hologic.ML"} that make manual
constructions of terms and types easier.
\end{readmore}
When constructing terms manually, there are a few subtle issues with
constants. They usually crop up when pattern matching terms or types, or
when constructing them. While it is perfectly ok to write the function
@{text is_true} as follows
*}
ML{*fun is_true @{term True} = true
| is_true _ = false*}
text {*
this does not work for picking out @{text "\<forall>"}-quantified terms. Because
the function
*}
ML{*fun is_all (@{term All} $ _) = true
| is_all _ = false*}
text {*
will not correctly match the formula @{prop[source] "\<forall>x::nat. P x"}:
@{ML_response [display,gray] "is_all @{term \"\<forall>x::nat. P x\"}" "false"}
The problem is that the @{text "@term"}-antiquotation in the pattern
fixes the type of the constant @{term "All"} to be @{typ "('a \<Rightarrow> bool) \<Rightarrow> bool"} for
an arbitrary, but fixed type @{typ "'a"}. A properly working alternative
for this function is
*}
ML{*fun is_all (Const ("All", _) $ _) = true
| is_all _ = false*}
text {*
because now
@{ML_response [display,gray] "is_all @{term \"\<forall>x::nat. P x\"}" "true"}
matches correctly (the first wildcard in the pattern matches any type and the
second any term).
However there is still a problem: consider the similar function that
attempts to pick out @{text "Nil"}-terms:
*}
ML{*fun is_nil (Const ("Nil", _)) = true
| is_nil _ = false *}
text {*
Unfortunately, also this function does \emph{not} work as expected, since
@{ML_response [display,gray] "is_nil @{term \"Nil\"}" "false"}
The problem is that on the ML-level the name of a constant is more
subtle than you might expect. The function @{ML is_all} worked correctly,
because @{term "All"} is such a fundamental constant, which can be referenced
by @{ML "Const (\"All\", some_type)" for some_type}. However, if you look at
@{ML_response [display,gray] "@{term \"Nil\"}" "Const (\"List.list.Nil\", \<dots>)"}
the name of the constant @{text "Nil"} depends on the theory in which the
term constructor is defined (@{text "List"}) and also in which datatype
(@{text "list"}). Even worse, some constants have a name involving
type-classes. Consider for example the constants for @{term "zero"} and
\mbox{@{text "(op *)"}}:
@{ML_response [display,gray] "(@{term \"0::nat\"}, @{term \"(op *)\"})"
"(Const (\"HOL.zero_class.zero\", \<dots>),
Const (\"HOL.times_class.times\", \<dots>))"}
While you could use the complete name, for example
@{ML "Const (\"List.list.Nil\", some_type)" for some_type}, for referring to or
matching against @{text "Nil"}, this would make the code rather brittle.
The reason is that the theory and the name of the datatype can easily change.
To make the code more robust, it is better to use the antiquotation
@{text "@{const_name \<dots>}"}. With this antiquotation you can harness the
variable parts of the constant's name. Therefore a function for
matching against constants that have a polymorphic type should
be written as follows.
*}
ML{*fun is_nil_or_all (Const (@{const_name "Nil"}, _)) = true
| is_nil_or_all (Const (@{const_name "All"}, _) $ _) = true
| is_nil_or_all _ = false *}
text {*
The antiquotation for properly referencing type constants is @{text "@{type_name \<dots>}"}.
For example
@{ML_response [display,gray]
"@{type_name \"list\"}" "\"List.list\""}
\footnote{\bf FIXME: Explain the following better; maybe put in a separate
section and link with the comment in the antiquotation section.}
Occasionally you have to calculate what the ``base'' name of a given
constant is. For this you can use the function @{ML_ind "Sign.extern_const"} or
@{ML_ind Long_Name.base_name}. For example:
@{ML_response [display,gray] "Sign.extern_const @{theory} \"List.list.Nil\"" "\"Nil\""}
The difference between both functions is that @{ML extern_const in Sign} returns
the smallest name that is still unique, whereas @{ML base_name in Long_Name} always
strips off all qualifiers.
\begin{readmore}
Functions about naming are implemented in @{ML_file "Pure/General/name_space.ML"};
functions about signatures in @{ML_file "Pure/sign.ML"}.
\end{readmore}
Although types of terms can often be inferred, there are many
situations where you need to construct types manually, especially
when defining constants. For example the function returning a function
type is as follows:
*}
ML{*fun make_fun_type ty1 ty2 = Type ("fun", [ty1, ty2]) *}
text {* This can be equally written with the combinator @{ML_ind "-->" in Term} as: *}
ML{*fun make_fun_type ty1 ty2 = ty1 --> ty2 *}
text {*
If you want to construct a function type with more than one argument
type, then you can use @{ML_ind "--->" in Term}.
*}
ML{*fun make_fun_types tys ty = tys ---> ty *}
text {*
A handy function for manipulating terms is @{ML_ind map_types in Term}: it takes a
function and applies it to every type in a term. You can, for example,
change every @{typ nat} in a term into an @{typ int} using the function:
*}
ML{*fun nat_to_int ty =
(case ty of
@{typ nat} => @{typ int}
| Type (s, tys) => Type (s, map nat_to_int tys)
| _ => ty)*}
text {*
Here is an example:
@{ML_response_fake [display,gray]
"map_types nat_to_int @{term \"a = (1::nat)\"}"
"Const (\"op =\", \"int \<Rightarrow> int \<Rightarrow> bool\")
$ Free (\"a\", \"int\") $ Const (\"HOL.one_class.one\", \"int\")"}
If you want to obtain the list of free type-variables of a term, you
can use the function @{ML_ind add_tfrees in Term}
(similarly @{ML_ind add_tvars in Term} for the schematic type-variables).
One would expect that such functions
take a term as input and return a list of types. But their type is actually
@{text[display] "Term.term -> (string * Term.sort) list -> (string * Term.sort) list"}
that is they take, besides a term, also a list of type-variables as input.
So in order to obtain the list of type-variables of a term you have to
call them as follows
@{ML_response [gray,display]
"Term.add_tfrees @{term \"(a, b)\"} []"
"[(\"'b\", [\"HOL.type\"]), (\"'a\", [\"HOL.type\"])]"}
The reason for this definition is that @{ML add_tfrees in Term} can
be easily folded over a list of terms. Similarly for all functions
named @{text "add_*"} in @{ML_file "Pure/term.ML"}.
\begin{exercise}\label{fun:revsum}
Write a function @{text "rev_sum : term -> term"} that takes a
term of the form @{text "t\<^isub>1 + t\<^isub>2 + \<dots> + t\<^isub>n"} (whereby @{text "n"} might be one)
and returns the reversed sum @{text "t\<^isub>n + \<dots> + t\<^isub>2 + t\<^isub>1"}. Assume
the @{text "t\<^isub>i"} can be arbitrary expressions and also note that @{text "+"}
associates to the left. Try your function on some examples.
\end{exercise}
\begin{exercise}\label{fun:makesum}
Write a function that takes two terms representing natural numbers
in unary notation (like @{term "Suc (Suc (Suc 0))"}), and produces the
number representing their sum.
\end{exercise}
\begin{exercise}\label{ex:debruijn}
Implement the function, which we below name deBruijn, that depends on a natural
number n$>$0 and constructs terms of the form:
\begin{center}
\begin{tabular}{r@ {\hspace{2mm}}c@ {\hspace{2mm}}l}
{\it rhs n} & $\dn$ & {\large$\bigwedge$}{\it i=1\ldots n. P\,i}\\
{\it lhs n} & $\dn$ & {\large$\bigwedge$}{\it i=1\ldots n. P\,i = P (i + 1 mod n)}
$\longrightarrow$ {\it rhs n}\\
{\it deBruijn n} & $\dn$ & {\it lhs n} $\longrightarrow$ {\it rhs n}\\
\end{tabular}
\end{center}
This function returns for n=3 the term
\begin{center}
\begin{tabular}{l}
(P 1 = P 2 $\longrightarrow$ P 1 $\wedge$ P 2 $\wedge$ P 3) $\wedge$\\
(P 2 = P 3 $\longrightarrow$ P 1 $\wedge$ P 2 $\wedge$ P 3) $\wedge$\\
(P 3 = P 1 $\longrightarrow$ P 1 $\wedge$ P 2 $\wedge$ P 3) $\longrightarrow$ P 1 $\wedge$ P 2 $\wedge$ P 3
\end{tabular}
\end{center}
Make sure you use the functions defined in @{ML_file "HOL/Tools/hologic.ML"}
for constructing the terms for the logical connectives.\footnote{Thanks to Roy
Dyckhoff for suggesting this exercise and working out the details.}
\end{exercise}
*}
section {* Type-Checking\label{sec:typechecking} *}
text {*
Remember Isabelle follows the Church-style typing for terms, i.e., a term contains
enough typing information (constants, free variables and abstractions all have typing
information) so that it is always clear what the type of a term is.
Given a well-typed term, the function @{ML_ind type_of in Term} returns the
type of a term. Consider for example:
@{ML_response [display,gray]
"type_of (@{term \"f::nat \<Rightarrow> bool\"} $ @{term \"x::nat\"})" "bool"}
To calculate the type, this function traverses the whole term and will
detect any typing inconsistency. For example changing the type of the variable
@{term "x"} from @{typ "nat"} to @{typ "int"} will result in the error message:
@{ML_response_fake [display,gray]
"type_of (@{term \"f::nat \<Rightarrow> bool\"} $ @{term \"x::int\"})"
"*** Exception- TYPE (\"type_of: type mismatch in application\" \<dots>"}
Since the complete traversal might sometimes be too costly and
not necessary, there is the function @{ML_ind fastype_of in Term}, which
also returns the type of a term.
@{ML_response [display,gray]
"fastype_of (@{term \"f::nat \<Rightarrow> bool\"} $ @{term \"x::nat\"})" "bool"}
However, efficiency is gained on the expense of skipping some tests. You
can see this in the following example
@{ML_response [display,gray]
"fastype_of (@{term \"f::nat \<Rightarrow> bool\"} $ @{term \"x::int\"})" "bool"}
where no error is detected.
Sometimes it is a bit inconvenient to construct a term with
complete typing annotations, especially in cases where the typing
information is redundant. A short-cut is to use the ``place-holder''
type @{ML_ind dummyT in Term} and then let type-inference figure out the
complete type. An example is as follows:
@{ML_response_fake [display,gray]
"let
val c = Const (@{const_name \"plus\"}, dummyT)
val o = @{term \"1::nat\"}
val v = Free (\"x\", dummyT)
in
Syntax.check_term @{context} (c $ o $ v)
end"
"Const (\"HOL.plus_class.plus\", \"nat \<Rightarrow> nat \<Rightarrow> nat\") $
Const (\"HOL.one_class.one\", \"nat\") $ Free (\"x\", \"nat\")"}
Instead of giving explicitly the type for the constant @{text "plus"} and the free
variable @{text "x"}, type-inference fills in the missing information.
\begin{readmore}
See @{ML_file "Pure/Syntax/syntax.ML"} where more functions about reading,
checking and pretty-printing of terms are defined. Functions related to
type-inference are implemented in @{ML_file "Pure/type.ML"} and
@{ML_file "Pure/type_infer.ML"}.
\end{readmore}
\footnote{\bf FIXME: say something about sorts.}
\footnote{\bf FIXME: give a ``readmore''.}
\begin{exercise}
Check that the function defined in Exercise~\ref{fun:revsum} returns a
result that type-checks. See what happens to the solutions of this
exercise given in Appendix \ref{ch:solutions} when they receive an
ill-typed term as input.
\end{exercise}
*}
section {* Certified Terms and Certified Types *}
text {*
You can freely construct and manipulate @{ML_type "term"}s and @{ML_type
typ}es, since they are just arbitrary unchecked trees. However, you
eventually want to see if a term is well-formed, or type-checks, relative to
a theory. Type-checking is done via the function @{ML_ind cterm_of in Thm}, which
converts a @{ML_type term} into a @{ML_type cterm}, a \emph{certified}
term. Unlike @{ML_type term}s, which are just trees, @{ML_type "cterm"}s are
abstract objects that are guaranteed to be type-correct, and they can only
be constructed via ``official interfaces''.
Certification is always relative to a theory context. For example you can
write:
@{ML_response_fake [display,gray]
"cterm_of @{theory} @{term \"(a::nat) + b = c\"}"
"a + b = c"}
This can also be written with an antiquotation:
@{ML_response_fake [display,gray]
"@{cterm \"(a::nat) + b = c\"}"
"a + b = c"}
Attempting to obtain the certified term for
@{ML_response_fake_both [display,gray]
"@{cterm \"1 + True\"}"
"Type unification failed \<dots>"}
yields an error (since the term is not typable). A slightly more elaborate
example that type-checks is:
@{ML_response_fake [display,gray]
"let
val natT = @{typ \"nat\"}
val zero = @{term \"0::nat\"}
val plus = Const (@{const_name plus}, [natT, natT] ---> natT)
in
cterm_of @{theory} (plus $ zero $ zero)
end"
"0 + 0"}
In Isabelle not just terms need to be certified, but also types. For example,
you obtain the certified type for the Isabelle type @{typ "nat \<Rightarrow> bool"} on
the ML-level as follows:
@{ML_response_fake [display,gray]
"ctyp_of @{theory} (@{typ nat} --> @{typ bool})"
"nat \<Rightarrow> bool"}
or with the antiquotation:
@{ML_response_fake [display,gray]
"@{ctyp \"nat \<Rightarrow> bool\"}"
"nat \<Rightarrow> bool"}
Since certified terms are, unlike terms, abstract objects, we cannot
pattern-match against them. However, we can construct them. For example
the function @{ML_ind capply in Thm} produces a certified application.
@{ML_response_fake [display,gray]
"Thm.capply @{cterm \"P::nat \<Rightarrow> bool\"} @{cterm \"3::nat\"}"
"P 3"}
Similarly the function @{ML_ind list_comb in Drule} from the structure @{ML_struct Drule}
applies a list of @{ML_type cterm}s.
@{ML_response_fake [display,gray]
"let
val chead = @{cterm \"P::unit \<Rightarrow> nat \<Rightarrow> bool\"}
val cargs = [@{cterm \"()\"}, @{cterm \"3::nat\"}]
in
Drule.list_comb (chead, cargs)
end"
"P () 3"}
\begin{readmore}
For functions related to @{ML_type cterm}s and @{ML_type ctyp}s see
the files @{ML_file "Pure/thm.ML"}, @{ML_file "Pure/more_thm.ML"} and
@{ML_file "Pure/drule.ML"}.
\end{readmore}
*}
section {* Theorems *}
text {*
Just like @{ML_type cterm}s, theorems are abstract objects of type @{ML_type thm}
that can only be built by going through interfaces. As a consequence, every proof
in Isabelle is correct by construction. This follows the tradition of the LCF approach.
To see theorems in ``action'', let us give a proof on the ML-level for the following
statement:
*}
lemma
assumes assm\<^isub>1: "\<And>(x::nat). P x \<Longrightarrow> Q x"
and assm\<^isub>2: "P t"
shows "Q t"(*<*)oops(*>*)
text {*
The corresponding ML-code is as follows:
*}
ML{*val my_thm =
let
val assm1 = @{cprop "\<And>(x::nat). P x \<Longrightarrow> Q x"}
val assm2 = @{cprop "(P::nat \<Rightarrow> bool) t"}
val Pt_implies_Qt =
assume assm1
|> forall_elim @{cterm "t::nat"}
val Qt = implies_elim Pt_implies_Qt (assume assm2)
in
Qt
|> implies_intr assm2
|> implies_intr assm1
end*}
text {*
If we print out the value of @{ML my_thm} then we see only the
final statement of the theorem.
@{ML_response_fake [display, gray]
"tracing (string_of_thm @{context} my_thm)"
"\<lbrakk>\<And>x. P x \<Longrightarrow> Q x; P t\<rbrakk> \<Longrightarrow> Q t"}
However, internally the code-snippet constructs the following
proof.
\[
\infer[(@{text "\<Longrightarrow>"}$-$intro)]{\vdash @{prop "(\<And>x. P x \<Longrightarrow> Q x) \<Longrightarrow> P t \<Longrightarrow> Q t"}}
{\infer[(@{text "\<Longrightarrow>"}$-$intro)]{@{prop "\<And>x. P x \<Longrightarrow> Q x"} \vdash @{prop "P t \<Longrightarrow> Q t"}}
{\infer[(@{text "\<Longrightarrow>"}$-$elim)]{@{prop "\<And>x. P x \<Longrightarrow> Q x"}, @{prop "P t"} \vdash @{prop "Q t"}}
{\infer[(@{text "\<And>"}$-$elim)]{@{prop "\<And>x. P x \<Longrightarrow> Q x"} \vdash @{prop "P t \<Longrightarrow> Q t"}}
{\infer[(assume)]{@{prop "\<And>x. P x \<Longrightarrow> Q x"} \vdash @{prop "\<And>x. P x \<Longrightarrow> Q x"}}{}}
&
\infer[(assume)]{@{prop "P t"} \vdash @{prop "P t"}}{}
}
}
}
\]
While we obtained a theorem as result, this theorem is not
yet stored in Isabelle's theorem database. Consequently, it cannot be
referenced on the user level. One way to store it in the theorem database is
by using the function @{ML_ind note in LocalTheory}.\footnote{\bf FIXME: make sure a pointer
to the section about local-setup is given earlier.}
*}
local_setup %gray {*
LocalTheory.note Thm.theoremK
((@{binding "my_thm"}, []), [my_thm]) #> snd *}
text {*
The fourth argument of @{ML note in LocalTheory} is the list of theorems we
want to store under a name. We can store more than one under a single name.
The first argument @{ML_ind theoremK in Thm} is
a kind indicator, which classifies the theorem. There are several such kind
indicators: for a theorem arising from a definition you should use @{ML_ind
definitionK in Thm}, for an axiom @{ML_ind axiomK in Thm}, and for
``normal'' theorems the kinds @{ML_ind theoremK in Thm} or @{ML_ind lemmaK
in Thm}. The second argument of @{ML note in LocalTheory} is the name under
which we store the theorem or theorems. The third argument can contain a
list of theorem attributes, which we will explain in detail in
Section~\ref{sec:attributes}. Below we just use one such attribute for
adding the theorem to the simpset:
*}
local_setup %gray {*
LocalTheory.note Thm.theoremK
((@{binding "my_thm_simp"},
[Attrib.internal (K Simplifier.simp_add)]), [my_thm]) #> snd *}
text {*
Note that we have to use another name under which the theorem is stored,
since Isabelle does not allow us to call @{ML_ind note in LocalTheory} twice
with the same name. The attribute needs to be wrapped inside the function @{ML_ind
internal in Attrib} from the structure @{ML_struct Attrib}. If we use the function
@{ML get_thm_names_from_ss} from
the previous chapter, we can check whether the theorem has actually been
added.
@{ML_response [display,gray]
"let
fun pred s = match_string \"my_thm_simp\" s
in
exists pred (get_thm_names_from_ss @{simpset})
end"
"true"}
The main point of storing the theorems @{thm [source] my_thm} and @{thm
[source] my_thm_simp} is that they can now also be referenced with the
\isacommand{thm}-command on the user-level of Isabelle
\begin{isabelle}
\isacommand{thm}~@{text "my_thm"}\isanewline
@{text ">"}~@{prop "\<lbrakk>\<And>x. P x \<Longrightarrow> Q x; P t\<rbrakk> \<Longrightarrow> Q t"}
\end{isabelle}
or with the @{text "@{thm \<dots>}"}-antiquotation on the ML-level. Otherwise the
user has no access to these theorems.
Recall that Isabelle does not let you call @{ML note in LocalTheory} twice
with the same theorem name. In effect, once a theorem is stored under a name,
this association is fixed. While this is a ``safety-net'' to make sure a
theorem name refers to a particular theorem or collection of theorems, it is
also a bit too restrictive in cases where a theorem name should refer to a
dynamically expanding list of theorems (like a simpset). Therefore Isabelle
also implements a mechanism where a theorem name can refer to a custom theorem
list. For this you can use the function @{ML_ind add_thms_dynamic in PureThy}.
To see how it works let us assume we defined our own theorem list @{text MyThmList}.
*}
ML{*structure MyThmList = GenericDataFun
(type T = thm list
val empty = []
val extend = I
val merge = K (op @))
fun update thm = Context.theory_map (MyThmList.map (fn thms => thm::thms))*}
text {*
The function @{ML update} allows us to update the theorem list, for example
by adding the theorem @{thm [source] TrueI}.
*}
setup %gray {* update @{thm TrueI} *}
text {*
We can now install the theorem list so that it is visible to the user and
can be refered to by a theorem name. For this need to call
@{ML_ind add_thms_dynamic in PureThy}
*}
setup %gray {*
PureThy.add_thms_dynamic (@{binding "mythmlist"}, MyThmList.get)
*}
text {*
with a name and a function that accesses the theorem list. Now if the
user issues the command
\begin{isabelle}
\isacommand{thm}~@{text "mythmlist"}\\
@{text "> True"}
\end{isabelle}
the current content of the theorem list is displayed. If more theorems are stored in
the list, say
*}
setup %gray {* update @{thm FalseE} *}
text {*
then the same command produces
\begin{isabelle}
\isacommand{thm}~@{text "mythmlist"}\\
@{text "> False \<Longrightarrow> ?P"}\\
@{text "> True"}
\end{isabelle}
There is a multitude of functions in the structures @{ML_struct Thm} and @{ML_struct Drule}
for managing or manipulating theorems. For example
we can test theorems for alpha equality. Suppose you proved the following three
theorems.
*}
lemma
shows thm1: "\<forall>x. P x"
and thm2: "\<forall>y. P y"
and thm3: "\<forall>y. Q y" sorry
text {*
Testing them for alpha equality using the function @{ML_ind eq_thm in Thm} produces:
@{ML_response [display,gray]
"(Thm.eq_thm (@{thm thm1}, @{thm thm2}),
Thm.eq_thm (@{thm thm2}, @{thm thm3}))"
"(true, false)"}
Many functions destruct theorems into @{ML_type cterm}s. For example
the functions @{ML_ind lhs_of in Thm} and @{ML_ind rhs_of in Thm} return
the left and right-hand side, respectively, of a meta-equality.
@{ML_response_fake [display,gray]
"let
val eq = @{thm True_def}
in
(Thm.lhs_of eq, Thm.rhs_of eq)
|> pairself (string_of_cterm @{context})
end"
"(True, (\<lambda>x. x) = (\<lambda>x. x))"}
Other function produce terms that can be pattern-matched.
Suppose the following two theorems.
*}
lemma
shows foo_test1: "A \<Longrightarrow> B \<Longrightarrow> C"
and foo_test2: "A \<longrightarrow> B \<longrightarrow> C" sorry
text {*
We can destruct them into premises and conclusions as follows.
@{ML_response_fake [display,gray]
"let
val ctxt = @{context}
fun prems_and_concl thm =
[\"Premises: \" ^ (string_of_terms ctxt (Thm.prems_of thm))] @
[\"Conclusion: \" ^ (string_of_term ctxt (Thm.concl_of thm))]
|> cat_lines
|> tracing
in
prems_and_concl @{thm foo_test1};
prems_and_concl @{thm foo_test2}
end"
"Premises: ?A, ?B
Conclusion: ?C
Premises:
Conclusion: ?A \<longrightarrow> ?B \<longrightarrow> ?C"}
Note that in the second case, there is no premise.
\begin{readmore}
The basic functions for theorems are defined in
@{ML_file "Pure/thm.ML"}, @{ML_file "Pure/more_thm.ML"} and @{ML_file "Pure/drule.ML"}.
\end{readmore}
The simplifier can be used to unfold definition in theorems. To show
this we build the theorem @{term "True \<equiv> True"} (Line 1) and then
unfold the constant @{term "True"} according to its definition (Line 2).
@{ML_response_fake [display,gray,linenos]
"Thm.reflexive @{cterm \"True\"}
|> Simplifier.rewrite_rule [@{thm True_def}]
|> string_of_thm @{context}
|> tracing"
"(\<lambda>x. x) = (\<lambda>x. x) \<equiv> (\<lambda>x. x) = (\<lambda>x. x)"}
Often it is necessary to transform theorems to and from the object
logic, that is replacing all @{text "\<longrightarrow>"} and @{text "\<forall>"} by @{text "\<Longrightarrow>"}
and @{text "\<And>"}, or the other way around. A reason for such a transformation
might be stating a definition. The reason is that definitions can only be
stated using object logic connectives, while theorems using the connectives
from the meta logic are more convenient for reasoning. Therefore there are
some build in functions which help with these transformations. The function
@{ML_ind rulify in ObjectLogic}
replaces all object connectives by equivalents in the meta logic. For example
@{ML_response_fake [display, gray]
"ObjectLogic.rulify @{thm foo_test2}"
"\<lbrakk>?A; ?B\<rbrakk> \<Longrightarrow> ?C"}
The transformation in the other direction can be achieved with function
@{ML_ind atomize in ObjectLogic} and the following code.
@{ML_response_fake [display,gray]
"let
val thm = @{thm foo_test1}
val meta_eq = ObjectLogic.atomize (cprop_of thm)
in
MetaSimplifier.rewrite_rule [meta_eq] thm
end"
"?A \<longrightarrow> ?B \<longrightarrow> ?C"}
In this code the function @{ML atomize in ObjectLogic} produces
a meta-equation between the given theorem and the theorem transformed
into the object logic. The result is the theorem with object logic
connectives. However, in order to completely transform a theorem
involving meta variables, such as @{thm [source] list.induct}, which
is of the form
@{thm [display] list.induct}
we have to first abstract over the meta variables @{text "?P"} and
@{text "?list"}. For this we can use the function
@{ML_ind forall_intr_vars in Drule}. This allows us to implement the
following function for atomizing a theorem.
*}
ML{*fun atomize_thm thm =
let
val thm' = forall_intr_vars thm
val thm'' = ObjectLogic.atomize (cprop_of thm')
in
MetaSimplifier.rewrite_rule [thm''] thm'
end*}
text {*
This function produces for the theorem @{thm [source] list.induct}
@{ML_response_fake [display, gray]
"atomize_thm @{thm list.induct}"
"\<forall>P list. P [] \<longrightarrow> (\<forall>a list. P list \<longrightarrow> P (a # list)) \<longrightarrow> P list"}
Theorems can also be produced from terms by giving an explicit proof.
One way to achieve this is by using the function @{ML_ind prove in Goal}
in the structure @{ML_struct Goal}. For example below we use this function
to prove the term @{term "P \<Longrightarrow> P"}.
@{ML_response_fake [display,gray]
"let
val trm = @{term \"P \<Longrightarrow> P::bool\"}
val tac = K (atac 1)
in
Goal.prove @{context} [\"P\"] [] trm tac
end"
"?P \<Longrightarrow> ?P"}
This function takes first a context and second a list of strings. This list
specifies which variables should be turned into schematic variables once the term
is proved. The fourth argument is the term to be proved. The fifth is a
corresponding proof given in form of a tactic (we explain tactics in
Chapter~\ref{chp:tactical}). In the code above, the tactic proves the theorem
by assumption. As before this code will produce a theorem, but the theorem
is not yet stored in the theorem database.
Theorems also contain auxiliary data, such as the name of the theorem, its
kind, the names for cases and so on. This data is stored in a string-string
list and can be retrieved with the function @{ML_ind get_tags in
Thm}. Assume you prove the following lemma.
*}
lemma foo_data:
shows "P \<Longrightarrow> P \<Longrightarrow> P" by assumption
text {*
The auxiliary data of this lemma can be retrieved using the function
@{ML_ind get_tags in Thm}. So far the the auxiliary data of this lemma is
@{ML_response_fake [display,gray]
"Thm.get_tags @{thm foo_data}"
"[(\"name\", \"General.foo_data\"), (\"kind\", \"lemma\")]"}
consisting of a name and a kind. When we store lemmas in the theorem database,
we might want to explicitly extend this data by attaching case names to the
two premises of the lemma. This can be done with the function @{ML_ind name in RuleCases}
from the structure @{ML_struct RuleCases}.
*}
local_setup %gray {*
LocalTheory.note Thm.lemmaK
((@{binding "foo_data'"}, []),
[(RuleCases.name ["foo_case_one", "foo_case_two"]
@{thm foo_data})]) #> snd *}
text {*
The data of the theorem @{thm [source] foo_data'} is then as follows:
@{ML_response_fake [display,gray]
"Thm.get_tags @{thm foo_data'}"
"[(\"name\", \"General.foo_data'\"), (\"kind\", \"lemma\"),
(\"case_names\", \"foo_case_one;foo_case_two\")]"}
You can observe the case names of this lemma on the user level when using
the proof methods @{text cases} and @{text induct}. In the proof below
*}
lemma
shows "Q \<Longrightarrow> Q \<Longrightarrow> Q"
proof (cases rule: foo_data')
(*<*)oops(*>*)
text_raw{*
\begin{tabular}{@ {}l}
\isacommand{print\_cases}\\
@{text "> cases:"}\\
@{text "> foo_case_one:"}\\
@{text "> let \"?case\" = \"?P\""}\\
@{text "> foo_case_two:"}\\
@{text "> let \"?case\" = \"?P\""}
\end{tabular}*}
text {*
we can proceed by analysing the cases @{text "foo_case_one"} and
@{text "foo_case_two"}. While if the theorem has no names, then
the cases have standard names @{text 1}, @{text 2} and so
on. This can be seen in the proof below.
*}
lemma
shows "Q \<Longrightarrow> Q \<Longrightarrow> Q"
proof (cases rule: foo_data)
(*<*)oops(*>*)
text_raw{*
\begin{tabular}{@ {}l}
\isacommand{print\_cases}\\
@{text "> cases:"}\\
@{text "> 1:"}\\
@{text "> let \"?case\" = \"?P\""}\\
@{text "> 2:"}\\
@{text "> let \"?case\" = \"?P\""}
\end{tabular}*}
text {*
One great feature of Isabelle is its document preparation system, where
proved theorems can be quoted in documents referencing directly their
formalisation. This helps tremendously to minimise cut-and-paste errors. However,
sometimes the verbatim quoting is not what is wanted or what can be shown to
readers. For such situations Isabelle allows the installation of \emph{\index*{theorem
styles}}. These are, roughly speaking, functions from terms to terms. The input
term stands for the theorem to be presented; the output can be constructed to
ones wishes. Let us, for example, assume we want to quote theorems without
leading @{text \<forall>}-quantifiers. For this we can implement the following function
that strips off @{text "\<forall>"}s.
*}
ML %linenosgray{*fun strip_allq (Const (@{const_name "All"}, _) $ Abs body) =
Term.dest_abs body |> snd |> strip_allq
| strip_allq (Const (@{const_name "Trueprop"}, _) $ t) =
strip_allq t
| strip_allq t = t*}
text {*
We use in Line 2 the function @{ML_ind dest_abs in Term} for deconstructing abstractions,
since this function deals correctly with potential name clashes. This function produces
a pair consisting of the variable and the body of the abstraction. We are only interested
in the body, which we feed into the recursive call. In Line 3 and 4, we also
have to explicitly strip of the outermost @{term Trueprop}-coercion. Now we can
install this function as the theorem style named @{text "my_strip_allq"}.
*}
setup %gray {*
Term_Style.setup "my_strip_allq" (Scan.succeed (K strip_allq))
*}
text {*
We can test this theorem style with the following theorem
*}
theorem style_test:
shows "\<forall>x y z. (x, x) = (y, z)" sorry
text {*
Now printing out in a document the theorem @{thm [source] style_test} normally
using @{text "@{thm \<dots>}"} produces
\begin{isabelle}
@{text "@{thm style_test}"}\\
@{text ">"}~@{thm style_test}
\end{isabelle}
as expected. But with the theorem style @{text "@{thm (my_strip_allq) \<dots>}"}
we obtain
\begin{isabelle}
@{text "@{thm (my_strip_allq) style_test}"}\\
@{text ">"}~@{thm (my_strip_allq) style_test}\\
\end{isabelle}
without the leading quantifiers. We can improve this theorem style by explicitly
giving a list of strings that should be used for the replacement of the
variables. For this we implement the function which takes a list of strings
and uses them as name in the outermost abstractions.
*}
ML{*fun rename_allq [] t = t
| rename_allq (x::xs) (Const (@{const_name "All"}, U) $ Abs (_, T, t)) =
Const (@{const_name "All"}, U) $ Abs (x, T, rename_allq xs t)
| rename_allq xs (Const (@{const_name "Trueprop"}, U) $ t) =
rename_allq xs t
| rename_allq _ t = t*}
text {*
We can now install a the modified theorem style as follows
*}
setup %gray {* let
val parser = Scan.repeat Args.name
fun action xs = K (rename_allq xs #> strip_allq)
in
Term_Style.setup "my_strip_allq2" (parser >> action)
end *}
text {*
The parser reads a list of names. In the function @{text action} we first
call @{ML rename_allq} with the parsed list, then we call @{ML strip_allq}
on the resulting term. We can now suggest, for example, two variables for
stripping off the first two @{text \<forall>}-quantifiers.
\begin{isabelle}
@{text "@{thm (my_strip_allq2 x' x'') style_test}"}\\
@{text ">"}~@{thm (my_strip_allq2 x' x'') style_test}
\end{isabelle}
Such theorem styles allow one to print out theorems in documents formatted to
ones heart content. Next we explain theorem attributes, which is another
mechanism for dealing with theorems.
\begin{readmore}
Theorem styles are implemented in @{ML_file "Pure/Thy/term_style.ML"}.
\end{readmore}
*}
section {* Theorem Attributes\label{sec:attributes} *}
text {*
Theorem attributes are @{text "[symmetric]"}, @{text "[THEN \<dots>]"}, @{text
"[simp]"} and so on. Such attributes are \emph{neither} tags \emph{nor} flags
annotated to theorems, but functions that do further processing of
theorems. In particular, it is not possible to find out
what are all theorems that have a given attribute in common, unless of course
the function behind the attribute stores the theorems in a retrievable
data structure.
If you want to print out all currently known attributes a theorem can have,
you can use the Isabelle command
\begin{isabelle}
\isacommand{print\_attributes}\\
@{text "> COMP: direct composition with rules (no lifting)"}\\
@{text "> HOL.dest: declaration of Classical destruction rule"}\\
@{text "> HOL.elim: declaration of Classical elimination rule"}\\
@{text "> \<dots>"}
\end{isabelle}
The theorem attributes fall roughly into two categories: the first category manipulates
theorems (for example @{text "[symmetric]"} and @{text "[THEN \<dots>]"}), and the second
stores theorems somewhere as data (for example @{text "[simp]"}, which adds
theorems to the current simpset).
To explain how to write your own attribute, let us start with an extremely simple
version of the attribute @{text "[symmetric]"}. The purpose of this attribute is
to produce the ``symmetric'' version of an equation. The main function behind
this attribute is
*}
ML{*val my_symmetric = Thm.rule_attribute (fn _ => fn thm => thm RS @{thm sym})*}
text {*
where the function @{ML_ind rule_attribute in Thm} expects a function taking a
context (which we ignore in the code above) and a theorem (@{text thm}), and
returns another theorem (namely @{text thm} resolved with the theorem
@{thm [source] sym}: @{thm sym[no_vars]}; the function @{ML_ind RS in Drule}
is explained in Section~\ref{sec:simpletacs}). The function
@{ML rule_attribute in Thm} then returns an attribute.
Before we can use the attribute, we need to set it up. This can be done
using the Isabelle command \isacommand{attribute\_setup} as follows:
*}
attribute_setup %gray my_sym =
{* Scan.succeed my_symmetric *} "applying the sym rule"
text {*
Inside the @{text "\<verbopen> \<dots> \<verbclose>"}, we have to specify a parser
for the theorem attribute. Since the attribute does not expect any further
arguments (unlike @{text "[THEN \<dots>]"}, for instance), we use the parser @{ML
Scan.succeed}. An example for the attribute @{text "[my_sym]"} is the proof
*}
lemma test[my_sym]: "2 = Suc (Suc 0)" by simp
text {*
which stores the theorem @{thm test} under the name @{thm [source] test}. You
can see this, if you query the lemma:
\begin{isabelle}
\isacommand{thm}~@{text "test"}\\
@{text "> "}~@{thm test}
\end{isabelle}
We can also use the attribute when referring to this theorem:
\begin{isabelle}
\isacommand{thm}~@{text "test[my_sym]"}\\
@{text "> "}~@{thm test[my_sym]}
\end{isabelle}
An alternative for setting up an attribute is the function @{ML_ind setup in Attrib}.
So instead of using \isacommand{attribute\_setup}, you can also set up the
attribute as follows:
*}
ML{*Attrib.setup @{binding "my_sym"} (Scan.succeed my_symmetric)
"applying the sym rule" *}
text {*
This gives a function from @{ML_type "theory -> theory"}, which
can be used for example with \isacommand{setup} or with
@{ML "Context.>> o Context.map_theory"}.\footnote{\bf FIXME: explain what happens here.}
As an example of a slightly more complicated theorem attribute, we implement
our own version of @{text "[THEN \<dots>]"}. This attribute will take a list of theorems
as argument and resolve the theorem with this list (one theorem
after another). The code for this attribute is
*}
ML{*fun MY_THEN thms =
Thm.rule_attribute
(fn _ => fn thm => fold (curry ((op RS) o swap)) thms thm)*}
text {*
where @{ML swap} swaps the components of a pair. The setup of this theorem
attribute uses the parser @{ML thms in Attrib}, which parses a list of
theorems.
*}
attribute_setup %gray MY_THEN = {* Attrib.thms >> MY_THEN *}
"resolving the list of theorems with the theorem"
text {*
You can, for example, use this theorem attribute to turn an equation into a
meta-equation:
\begin{isabelle}
\isacommand{thm}~@{text "test[MY_THEN eq_reflection]"}\\
@{text "> "}~@{thm test[MY_THEN eq_reflection]}
\end{isabelle}
If you need the symmetric version as a meta-equation, you can write
\begin{isabelle}
\isacommand{thm}~@{text "test[MY_THEN sym eq_reflection]"}\\
@{text "> "}~@{thm test[MY_THEN sym eq_reflection]}
\end{isabelle}
It is also possible to combine different theorem attributes, as in:
\begin{isabelle}
\isacommand{thm}~@{text "test[my_sym, MY_THEN eq_reflection]"}\\
@{text "> "}~@{thm test[my_sym, MY_THEN eq_reflection]}
\end{isabelle}
However, here also a weakness of the concept
of theorem attributes shows through: since theorem attributes can be
arbitrary functions, they do not commute in general. If you try
\begin{isabelle}
\isacommand{thm}~@{text "test[MY_THEN eq_reflection, my_sym]"}\\
@{text "> "}~@{text "exception THM 1 raised: RSN: no unifiers"}
\end{isabelle}
you get an exception indicating that the theorem @{thm [source] sym}
does not resolve with meta-equations.
The purpose of @{ML_ind rule_attribute in Thm} is to directly manipulate
theorems. Another usage of theorem attributes is to add and delete theorems
from stored data. For example the theorem attribute @{text "[simp]"} adds
or deletes a theorem from the current simpset. For these applications, you
can use @{ML_ind declaration_attribute in Thm}. To illustrate this function,
let us introduce a theorem list.
*}
ML{*structure MyThms = Named_Thms
(val name = "attr_thms"
val description = "Theorems for an Attribute") *}
text {*
We are going to modify this list by adding and deleting theorems.
For this we use the two functions @{ML MyThms.add_thm} and
@{ML MyThms.del_thm}. You can turn them into attributes
with the code
*}
ML{*val my_add = Thm.declaration_attribute MyThms.add_thm
val my_del = Thm.declaration_attribute MyThms.del_thm *}
text {*
and set up the attributes as follows
*}
attribute_setup %gray my_thms = {* Attrib.add_del my_add my_del *}
"maintaining a list of my_thms"
text {*
The parser @{ML_ind add_del in Attrib} is a predefined parser for
adding and deleting lemmas. Now if you prove the next lemma
and attach to it the attribute @{text "[my_thms]"}
*}
lemma trueI_2[my_thms]: "True" by simp
text {*
then you can see it is added to the initially empty list.
@{ML_response_fake [display,gray]
"MyThms.get @{context}"
"[\"True\"]"}
You can also add theorems using the command \isacommand{declare}.
*}
declare test[my_thms] trueI_2[my_thms add]
text {*
With this attribute, the @{text "add"} operation is the default and does
not need to be explicitly given. These three declarations will cause the
theorem list to be updated as:
@{ML_response_fake [display,gray]
"MyThms.get @{context}"
"[\"True\", \"Suc (Suc 0) = 2\"]"}
The theorem @{thm [source] trueI_2} only appears once, since the
function @{ML_ind add_thm in Thm} tests for duplicates, before extending
the list. Deletion from the list works as follows:
*}
declare test[my_thms del]
text {* After this, the theorem list is again:
@{ML_response_fake [display,gray]
"MyThms.get @{context}"
"[\"True\"]"}
We used in this example two functions declared as @{ML_ind
declaration_attribute in Thm}, but there can be any number of them. We just
have to change the parser for reading the arguments accordingly.
\footnote{\bf FIXME What are: @{text "theory_attributes"}, @{text "proof_attributes"}?}
\begin{readmore}
FIXME: @{ML_file "Pure/more_thm.ML"}; parsers for attributes is in
@{ML_file "Pure/Isar/attrib.ML"}...also explained in the chapter about
parsing.
\end{readmore}
*}
section {* Theories\label{sec:theories} (TBD) *}
text {*
Theories are the most fundamental building blocks in Isabelle. They
contain definitions, syntax declarations, axioms, proofs etc. If a definition
is stated, it must be stored in a theory in order to be usable later
on. Similar with proofs: once a proof is finished, the proved theorem
needs to be stored in the theorem database of the theory in order to
be usable. All relevant data of a theort can be querried as follows.
\begin{isabelle}
\isacommand{print\_theory}\\
@{text "> names: Pure Code_Generator HOL \<dots>"}\\
@{text "> classes: Inf < type \<dots>"}\\
@{text "> default sort: type"}\\
@{text "> syntactic types: #prop \<dots>"}\\
@{text "> logical types: 'a \<times> 'b \<dots>"}\\
@{text "> type arities: * :: (random, random) random \<dots>"}\\
@{text "> logical constants: == :: 'a \<Rightarrow> 'a \<Rightarrow> prop \<dots>"}\\
@{text "> abbreviations: \<dots>"}\\
@{text "> axioms: \<dots>"}\\
@{text "> oracles: \<dots>"}\\
@{text "> definitions: \<dots>"}\\
@{text "> theorems: \<dots>"}
\end{isabelle}
\begin{center}
\begin{tikzpicture}
\node[top color=white, bottom color=gray!30, draw=black!100, drop shadow] {A};
\end{tikzpicture}
\end{center}
In contrast to an ordinary theory, which simply consists of a type
signature, as well as tables for constants, axioms and theorems, a local
theory contains additional context information, such as locally fixed
variables and local assumptions that may be used by the package. The type
@{ML_type local_theory} is identical to the type of \emph{proof contexts}
@{ML_type "Proof.context"}, although not every proof context constitutes a
valid local theory.
@{ML "Context.>> o Context.map_theory"}
*}
section {* Setups (TBD) *}
text {*
@{ML Sign.declare_const}
In the previous section we used \isacommand{setup} in order to make
a theorem attribute known to Isabelle. What happens behind the scenes
is that \isacommand{setup} expects a function of type
@{ML_type "theory -> theory"}: the input theory is the current theory and the
output the theory where the theory attribute has been stored.
This is a fundamental principle in Isabelle. A similar situation occurs
for example with declaring constants. The function that declares a
constant on the ML-level is @{ML_ind add_consts_i in Sign}.
If you write\footnote{Recall that ML-code needs to be
enclosed in \isacommand{ML}~@{text "\<verbopen> \<dots> \<verbclose>"}.}
*}
ML{*Sign.add_consts_i [(@{binding "BAR"}, @{typ "nat"}, NoSyn)] @{theory} *}
text {*
for declaring the constant @{text "BAR"} with type @{typ nat} and
run the code, then you indeed obtain a theory as result. But if you
query the constant on the Isabelle level using the command \isacommand{term}
\begin{isabelle}
\isacommand{term}~@{text [quotes] "BAR"}\\
@{text "> \"BAR\" :: \"'a\""}
\end{isabelle}
you do not obtain a constant of type @{typ nat}, but a free variable (printed in
blue) of polymorphic type. The problem is that the ML-expression above did
not register the declaration with the current theory. This is what the command
\isacommand{setup} is for. The constant is properly declared with
*}
setup %gray {* Sign.add_consts_i [(@{binding "BAR"}, @{typ "nat"}, NoSyn)] *}
text {*
Now
\begin{isabelle}
\isacommand{term}~@{text [quotes] "BAR"}\\
@{text "> \"BAR\" :: \"nat\""}
\end{isabelle}
returns a (black) constant with the type @{typ nat}.
A similar command is \isacommand{local\_setup}, which expects a function
of type @{ML_type "local_theory -> local_theory"}. Later on we will also
use the commands \isacommand{method\_setup} for installing methods in the
current theory and \isacommand{simproc\_setup} for adding new simprocs to
the current simpset.
*}
section {* Contexts (TBD) *}
section {* Local Theories (TBD) *}
(*
setup {*
Sign.add_consts_i [(Binding"bar", @{typ "nat"},NoSyn)]
*}
lemma "bar = (1::nat)"
oops
setup {*
Sign.add_consts_i [("foo", @{typ "nat"},NoSyn)]
#> PureThy.add_defs false [((@{binding "foo_def"},
Logic.mk_equals (Const ("FirstSteps.foo", @{typ "nat"}), @{term "1::nat"})), [])]
#> snd
*}
*)
(*
lemma "foo = (1::nat)"
apply(simp add: foo_def)
done
thm foo_def
*)
section {* Pretty-Printing\label{sec:pretty} *}
text {*
So far we printed out only plain strings without any formatting except for
occasional explicit line breaks using @{text [quotes] "\\n"}. This is
sufficient for ``quick-and-dirty'' printouts. For something more
sophisticated, Isabelle includes an infrastructure for properly formatting
text. Most of its functions do not operate on @{ML_type string}s, but on
instances of the pretty type:
@{ML_type_ind [display, gray] "Pretty.T"}
The function @{ML str in Pretty} transforms a (plain) string into such a pretty
type. For example
@{ML_response_fake [display,gray]
"Pretty.str \"test\"" "String (\"test\", 4)"}
where the result indicates that we transformed a string with length 4. Once
you have a pretty type, you can, for example, control where linebreaks may
occur in case the text wraps over a line, or with how much indentation a
text should be printed. However, if you want to actually output the
formatted text, you have to transform the pretty type back into a @{ML_type
string}. This can be done with the function @{ML_ind string_of in Pretty}. In what
follows we will use the following wrapper function for printing a pretty
type:
*}
ML{*fun pprint prt = tracing (Pretty.string_of prt)*}
text {*
The point of the pretty-printing infrastructure is to give hints about how to
layout text and let Isabelle do the actual layout. Let us first explain
how you can insert places where a line break can occur. For this assume the
following function that replicates a string n times:
*}
ML{*fun rep n str = implode (replicate n str) *}
text {*
and suppose we want to print out the string:
*}
ML{*val test_str = rep 8 "fooooooooooooooobaaaaaaaaaaaar "*}
text {*
We deliberately chose a large string so that it spans over more than one line.
If we print out the string using the usual ``quick-and-dirty'' method, then
we obtain the ugly output:
@{ML_response_fake [display,gray]
"tracing test_str"
"fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar foooooooooo
ooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaa
aaaaaaar fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar fo
oooooooooooooobaaaaaaaaaaaar"}
We obtain the same if we just use the function @{ML pprint}.
@{ML_response_fake [display,gray]
"pprint (Pretty.str test_str)"
"fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar foooooooooo
ooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaa
aaaaaaar fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar fo
oooooooooooooobaaaaaaaaaaaar"}
However by using pretty types you have the ability to indicate possible
linebreaks for example at each whitespace. You can achieve this with the
function @{ML_ind breaks in Pretty}, which expects a list of pretty types
and inserts a possible line break in between every two elements in this
list. To print this list of pretty types as a single string, we concatenate
them with the function @{ML_ind blk in Pretty} as follows:
@{ML_response_fake [display,gray]
"let
val ptrs = map Pretty.str (space_explode \" \" test_str)
in
pprint (Pretty.blk (0, Pretty.breaks ptrs))
end"
"fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar"}
Here the layout of @{ML test_str} is much more pleasing to the
eye. The @{ML "0"} in @{ML_ind blk in Pretty} stands for no hanging
indentation of the printed string. You can increase the indentation
and obtain
@{ML_response_fake [display,gray]
"let
val ptrs = map Pretty.str (space_explode \" \" test_str)
in
pprint (Pretty.blk (3, Pretty.breaks ptrs))
end"
"fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar"}
where starting from the second line the indent is 3. If you want
that every line starts with the same indent, you can use the
function @{ML_ind indent in Pretty} as follows:
@{ML_response_fake [display,gray]
"let
val ptrs = map Pretty.str (space_explode \" \" test_str)
in
pprint (Pretty.indent 10 (Pretty.blk (0, Pretty.breaks ptrs)))
end"
" fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar
fooooooooooooooobaaaaaaaaaaaar fooooooooooooooobaaaaaaaaaaaar"}
If you want to print out a list of items separated by commas and
have the linebreaks handled properly, you can use the function
@{ML_ind commas in Pretty}. For example
@{ML_response_fake [display,gray]
"let
val ptrs = map (Pretty.str o string_of_int) (99998 upto 100020)
in
pprint (Pretty.blk (0, Pretty.commas ptrs))
end"
"99998, 99999, 100000, 100001, 100002, 100003, 100004, 100005, 100006,
100007, 100008, 100009, 100010, 100011, 100012, 100013, 100014, 100015,
100016, 100017, 100018, 100019, 100020"}
where @{ML upto} generates a list of integers. You can print out this
list as a ``set'', that means enclosed inside @{text [quotes] "{"} and
@{text [quotes] "}"}, and separated by commas using the function
@{ML_ind enum in Pretty}. For example
*}
text {*
@{ML_response_fake [display,gray]
"let
val ptrs = map (Pretty.str o string_of_int) (99998 upto 100020)
in
pprint (Pretty.enum \",\" \"{\" \"}\" ptrs)
end"
"{99998, 99999, 100000, 100001, 100002, 100003, 100004, 100005, 100006,
100007, 100008, 100009, 100010, 100011, 100012, 100013, 100014, 100015,
100016, 100017, 100018, 100019, 100020}"}
As can be seen, this function prints out the ``set'' so that starting
from the second, each new line has an indentation of 2.
If you print out something that goes beyond the capabilities of the
standard functions, you can do relatively easily the formatting
yourself. Assume you want to print out a list of items where like in ``English''
the last two items are separated by @{text [quotes] "and"}. For this you can
write the function
*}
ML %linenosgray{*fun and_list [] = []
| and_list [x] = [x]
| and_list xs =
let
val (front, last) = split_last xs
in
(Pretty.commas front) @
[Pretty.brk 1, Pretty.str "and", Pretty.brk 1, last]
end *}
text {*
where Line 7 prints the beginning of the list and Line
8 the last item. We have to use @{ML "Pretty.brk 1"} in order
to insert a space (of length 1) before the
@{text [quotes] "and"}. This space is also a place where a line break
can occur. We do the same after the @{text [quotes] "and"}. This gives you
for example
@{ML_response_fake [display,gray]
"let
val ptrs1 = map (Pretty.str o string_of_int) (1 upto 22)
val ptrs2 = map (Pretty.str o string_of_int) (10 upto 28)
in
pprint (Pretty.blk (0, and_list ptrs1));
pprint (Pretty.blk (0, and_list ptrs2))
end"
"1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21
and 22
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 and
28"}
Next we like to pretty-print a term and its type. For this we use the
function @{text "tell_type"}.
*}
ML %linenosgray{*fun tell_type ctxt t =
let
fun pstr s = Pretty.breaks (map Pretty.str (space_explode " " s))
val ptrm = Pretty.quote (Syntax.pretty_term ctxt t)
val pty = Pretty.quote (Syntax.pretty_typ ctxt (fastype_of t))
in
pprint (Pretty.blk (0,
(pstr "The term " @ [ptrm] @ pstr " has type "
@ [pty, Pretty.str "."])))
end*}
text {*
In Line 3 we define a function that inserts possible linebreaks in places
where a space is. In Lines 4 and 5 we pretty-print the term and its type
using the functions @{ML_ind pretty_term in Syntax} and @{ML_ind
pretty_typ in Syntax}. We also use the function @{ML_ind quote in
Pretty} in order to enclose the term and type inside quotation marks. In
Line 9 we add a period right after the type without the possibility of a
line break, because we do not want that a line break occurs there.
Now you can write
@{ML_response_fake [display,gray]
"tell_type @{context} @{term \"min (Suc 0)\"}"
"The term \"min (Suc 0)\" has type \"nat \<Rightarrow> nat\"."}
To see the proper line breaking, you can try out the function on a bigger term
and type. For example:
@{ML_response_fake [display,gray]
"tell_type @{context} @{term \"op = (op = (op = (op = (op = op =))))\"}"
"The term \"op = (op = (op = (op = (op = op =))))\" has type
\"((((('a \<Rightarrow> 'a \<Rightarrow> bool) \<Rightarrow> bool) \<Rightarrow> bool) \<Rightarrow> bool) \<Rightarrow> bool) \<Rightarrow> bool\"."}
The function @{ML_ind big_list in Pretty} helps with printing long lists.
It is used for example in the command \isacommand{print\_theorems}. An
example is as follows.
@{ML_response_fake [display,gray]
"let
val pstrs = map (Pretty.str o string_of_int) (4 upto 10)
in
pprint (Pretty.big_list \"header\" pstrs)
end"
"header
4
5
6
7
8
9
10"}
Like @{ML blk in Pretty}, the function @{ML_ind chunks in Pretty} prints out
a list of items, but automatically inserts forced breaks between each item.
Compare
@{ML_response_fake [display,gray]
"let
val a_and_b = [Pretty.str \"a\", Pretty.str \"b\"]
in
pprint (Pretty.blk (0, a_and_b));
pprint (Pretty.chunks a_and_b)
end"
"ab
a
b"}
\footnote{\bf FIXME: What happens with printing big formulae?}
\begin{readmore}
The general infrastructure for pretty-printing is implemented in the file
@{ML_file "Pure/General/pretty.ML"}. The file @{ML_file "Pure/Syntax/syntax.ML"}
contains pretty-printing functions for terms, types, theorems and so on.
@{ML_file "Pure/General/markup.ML"}
\end{readmore}
*}
(*
text {*
printing into the goal buffer as part of the proof state
*}
text {* writing into the goal buffer *}
ML {* fun my_hook interactive state =
(interactive ? Proof.goal_message (fn () => Pretty.str
"foo")) state
*}
setup %gray {* Context.theory_map (Specification.add_theorem_hook my_hook) *}
lemma "False"
oops
*)
(*
ML {*
fun setmp_show_all_types f =
setmp show_all_types
(! show_types orelse ! show_sorts orelse ! show_all_types) f;
val ctxt = @{context};
val t1 = @{term "undefined::nat"};
val t2 = @{term "Suc y"};
val pty = Pretty.block (Pretty.breaks
[(setmp show_question_marks false o setmp_show_all_types)
(Syntax.pretty_term ctxt) t1,
Pretty.str "=", Syntax.pretty_term ctxt t2]);
pty |> Pretty.string_of
*}
text {* the infrastructure of Syntax-pretty-term makes sure it is printed nicely *}
ML {* Pretty.mark Markup.hilite (Pretty.str "foo") |> Pretty.string_of |> tracing *}
ML {* (Pretty.str "bar") |> Pretty.string_of |> tracing *}
*)
section {* Misc (TBD) *}
ML {*Datatype.get_info @{theory} "List.list"*}
text {*
FIXME: association lists:
@{ML_file "Pure/General/alist.ML"}
FIXME: calling the ML-compiler
*}
section {* Managing Name Spaces (TBD) *}
ML {* Sign.intern_type @{theory} "list" *}
ML {* Sign.intern_const @{theory} "prod_fun" *}
section {* Summary *}
text {*
\begin{conventions}
\begin{itemize}
\item Start with a proper context and then pass it around
through all your functions.
\end{itemize}
\end{conventions}
*}
end